Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PANORAMIC VIEW MONITOR SYSTEM › 2020.08–2021.07
RM3700E _56 Audio / Visual / Telematics _093031 PARK ASSIST / MONITORING _0442662 PANORAMIC VIEW MONITOR SYSTEM D

PARK ASSIST / MONITORING  PANORAMIC VIEW MONITOR SYSTEM  INITIALIZATION  


INITIALIZE PANORAMIC VIEW MONITOR SYSTEM


a.

When "!" mark is displayed on the radio and display receiver assembly, correct the steering angle neutral point using the following method.

i.

Fully turn the steering wheel to the left and right on flat ground.

NOTICE:

Memorizing the steering angle neutral point must be carried out with start the hybrid control system. Apply the parking brake, depress the brake pedal, check that the shift lever is in P, and ensure that the vehicle is not moving.


HINT:

If the steering angle neutral point cannot be memorized by fully turning the steering wheel to the left and right, perform Steering Angle Setting in Calibration.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>CALIBRATION