Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PANORAMIC VIEW MONITOR SYSTEM › 2020.08–2021.07
RM3700E _56 Audio / Visual / Telematics _093031 PARK ASSIST / MONITORING _0442662 PANORAMIC VIEW MONITOR SYSTEM U

PARK ASSIST / MONITORING  PANORAMIC VIEW MONITOR SYSTEM  TERMINALS OF ECU  


PARKING ASSIST ECU


E433191N02
3.083,0.167 3.583,0.417 0.5,0.25 3.198,0.177 3.656,0.375 0.458,0.198 10 false O25

a.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Terminal Description Condition Specified Condition
O25-1 (+B) -Body ground Ignition source signal Ignition switch off 11 to 14 V
O25-19 (+B2) - Body ground Ignition source signal Ignition switch off 11 to 14 V
O25-3 (ACC) - Body ground ACC power source signal Ignition switch ACC 11 to 14 V
Ignition switch off Below 1 V
O25-21 (IG) - Body ground IG power source signal Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V
O25-2 (GND1) - Body ground Ground Always Below 1 Ω
O25-20 (GND2) - Body ground Ground Always Below 1 Ω
O25-40 (CANH) CAN communication line - -
O25-18 (CANL) CAN communication line - -
O25-15 (BLSW) - Body ground Panoramic view monitor switch signal Ignition switch ON, panoramic view monitor switch off 5.5 to 6.5 V
Ignition switch ON, panoramic view monitor switch on Below 1 V
O25-37 (RSW+) - Body ground Terminal required by law Panoramic image being displayed 0 to 2 V
Panoramic image not being displayed 5.5 to 7.05 V
O25-36 (LCV+) - O25-26 (LGND) Side television camera assembly LH display signal input Ignition switch ON, panoramic view monitor switch on, camera lens not covered, displaying image Pulse generation (See waveform 1)
Ignition switch ON, panoramic view monitor switch on, camera lens covered, blacking out screen Pulse generation (See waveform 2)
O25-14 (SGND) - Body ground Side television camera assembly LH ground (shield) Always Below 1 Ω
O25-9 (LCB+) - O25-26 (LGND) Ignition source to side television camera assembly LH Ignition switch ON 5.5 to 7.05 V
O25-10 (BCV-) - Body ground Front television camera assembly display ground Always Below 1 Ω
O25-34 (SGND) - Body ground Front television camera assembly ground (shield) Always Below 1 Ω
O25-7 (BCB+) - O25-24 (BGND) Power source to front television camera Ignition switch ON 5.5 to 7.05 V
O25-31 (RCV-) - Body ground Side television camera assembly RH display ground Always Below 1 Ω
O25-23 (RGND) - Body ground Side television camera assembly RH display ground Always Below 1 Ω
O25-11 (CV+) - O25-25 (CGND) Rear television camera assembly display signal input Ignition switch ON, panoramic view monitor switch on, camera lens not covered, displaying image Pulse generation (See waveform 1)
Ignition switch ON, panoramic view monitor switch on, camera lens covered, blacking out screen Pulse generation (See waveform 2)
O25-35 (CV-) - Body ground Rear television camera assembly display ground Always Below 1 Ω
O25-12 (SGND) - Body ground Rear television camera assembly ground (shield) Always Below 1 Ω
O25-25 (CGND) - Body ground Rear television camera assembly ground Always Below 1 Ω
O25-8 (CB+) - O25-25 (CGND) Ignition source to television camera assembly Ignition switch ON 5.5 to 7.05 V
O25-13 (LCV-) - Body ground Side television camera assembly LH display ground Always Below 1 Ω
O25-26 (LGND) - Body ground Side television camera assembly LH ground Always Below 1 Ω
O25-33 (BCV+) - O25-24 (BGND) Front television camera assembly display signal input Waveform 1: Ignition switch ON, panoramic view monitor switch on, camera lens not covered, displaying image Pulse generation (See waveform 1)
Waveform 2: Ignition switch ON, panoramic view monitor switch on, camera lens covered, blacking out screen Pulse generation (See waveform 2)
O25-24 (BGND) - Body ground Front television camera assembly display ground Always Below 1 Ω
O25-30 (RCV+) - O25-23 (RGND) Side television camera assembly RH display signal input Waveform 1: Ignition switch ON, panoramic view monitor switch on, camera lens not covered, displaying image Pulse generation (See waveform 1)
Waveform 2: Ignition switch ON, panoramic view monitor switch on, camera lens covered, blacking out screen Pulse generation (See waveform 2)
O25-32 (SGND)- Body ground Side television camera assembly RH ground (shield) Always Below 1 Ω
O25-27 (NS+) - O25-28 (NS-) Video signal Ignition switch ON, panoramic view monitor switch on, camera lens not covered, displaying image Pulse generation (See waveform 3)
O25-29 (NSG) - Body ground Shield ground Always Below 1 Ω
O25-28 (NS-) - Body ground Video ground Always Below 1 Ω


b.

Using an oscilloscope, check the waveform.

E254326C01
0.917,1.5 1.417,1.5 1.417,1.5 1.469,1.354 false 0.917,1.667 1.49,1.667 1.49,1.667 1.563,1.313 false 4.25,1.417 4.75,1.417 4.75,1.417 4.833,1.198 false 4.24,1.688 4.813,1.688 4.813,1.688 4.948,1.146 false 0.76,0.823 1.219,1.021 0.458,0.198 10 GND 4.031,0.823 4.49,1.021 0.458,0.198 10 GND 0.438,0.083 0.75,0.281 0.313,0.198 10 *a 3.771,0.083 4.083,0.281 0.313,0.198 10 *b 0.75,1.417 1.063,1.615 0.313,0.198 10 *c 0.75,1.604 1.031,1.76 0.281,0.156 10 *d 4.083,1.344 4.333,1.5 0.25,0.156 10 *c 4.073,1.625 4.292,1.771 0.219,0.146 10 *d
*a Waveform 1 *b Waveform 2
*c Synchronization Signal *d Video Waveform


i.

Waveform 1, 2

Measurement Condition
Item Content
Measurement terminal
·

O25-36 (LCV+) - O25-26 (LGND)

·

O25-11 (CV+) - O25-25 (CGND)

·

O25-33 (BCV+) - O25-24 (BGND)

·

O25-30 (RCV+) - O25-23 (RGND)


Measurement setting 200 mV/DIV., 50 μsec./DIV.
Condition
·

Waveform 1: Ignition switch ON, panoramic view monitor switch on, camera lens not covered, displaying image

·

Waveform 2: Ignition switch ON, panoramic view monitor switch on, camera lens covered, blacking out screen



HINT:
·

The video waveform changes according to the image sent by the television camera assembly.

·

The video waveform is constantly output when the ignition switch is ACC.




ii.
E336160C01
1.115,2.26 1.01,2.833 1.01,2.833 0.896,2.833 false 1.25,2.135 1.406,2.854 1.406,2.854 1.583,2.854 false 0.229,0.313 0.542,0.51 0.313,0.198 10 false *a 0.271,1.594 0.688,1.792 0.417,0.198 10 false GND 1.625,2.771 1.938,2.969 0.313,0.198 10 false *c 0.698,2.74 1.01,2.938 0.313,0.198 10 false *b
*a Waveform 3 (camera lens is not covered, displaying an image)
*b Synchronization Signal
*c Video Waveform


Waveform 3

Item Content
Measurement terminal O25-27 (NS+) - O25-28 (NS-)
Measurement setting 200 mV/DIV., 50 μs./DIV.
Condition Ignition switch ON, panoramic view monitor switch on, camera lens not covered, displaying image

HINT:

The video waveform changes according to the image sent by the parking assist ECU.





RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Audio and Visual System)


Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>TERMINALS OF ECU


RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Navigation System)


Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>TERMINALS OF ECU