87510K
1.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH
| *a | Component without harness connected
(Front Seat Cushion Heater Assembly RH) |
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
If the result is not as specified, replace the front seat cushion heater assembly RH. |
||
|
Click Location & Routing(O20)Location & Routingewd_type=routing;type=c;code=O20 Click Connector(O20)Body>Floor Wire>Rear Seat Inner Belt with Center Assembly LHewd_type=component;type=c;code=O20;pinno=7,5 |
||
| O20-7 - B-1 | Seat heater temperature 23 °C (73 °F) | 1.99 to 2.43 Ω |
| O20-7 - B-2 | Seat heater temperature 23 °C (73 °F) | 2.37 to 2.89 Ω |
| O20-5 - B-3 | Seat heater temperature 23 °C (73 °F) | Below 1 Ω |
87510L
2.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH
| *a | Component without harness connected
(Front Seat Cushion Heater Assembly LH) |
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
If the result is not as specified, replace the front seat cushion heater assembly LH. |
||
|
Click Location & Routing(O20)Location & Routingewd_type=routing;type=c;code=O20 Click Connector(O20)Body>Floor Wire>Rear Seat Inner Belt with Center Assembly LHewd_type=component;type=c;code=O20;pinno=7,5 |
||
| O20-7 - B-1 | Seat heater temperature 23 °C (73 °F) | 1.99 to 2.43 Ω |
| O20-7 - B-2 | Seat heater temperature 23 °C (73 °F) | 2.37 to 2.89 Ω |
| O20-5 - B-3 | Seat heater temperature 23 °C (73 °F) | Below 1 Ω |