Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › FRONT DRIVE SHAFT ASSEMBLY (for M15A-FKS) › 2020.08–2021.07
RM3700E _52 Drivetrain _094372 DRIVE SHAFT / PROPELLER SHAFT _0444420 FRONT DRIVE SHAFT ASSEMBLY(for M15A-FKS) G

DRIVE SHAFT / PROPELLER SHAFT  FRONT DRIVE SHAFT ASSEMBLY(for M15A-FKS)  INSPECTION  


PROCEDURE

Hide 1.INSPECT FRONT DRIVE SHAFT ASSEMBLY

NOTICE:

Keep the drive shaft assembly level during inspection.


a.
C211744

Check that there is no excessive play in the radial direction of the outboard joint.


b.

Check that the inboard joint slides smoothly in the thrust direction.


c.

Check that there is no excessive play in the radial direction of the inboard joint.


d.

Check the boots for damage.


e.
C296188N01
1.438,1.656 1.594,1.854 0.156,0.198 10 false A

Check whether each drive shaft dimension (A) is within specification.

Dimension (A):
for LH Side 622.2 to 632.2 mm (2.04 to 2.07 ft.)
for RH Side 834.1 to 844.1 mm (2.74 to 2.77 ft.)