CUSTOMIZE LIGHTING SYSTEM (EXT)
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
The following items can be customized.
Customizing with the GTS
Enter the following menus: Customize Setting / Light Control.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Tail Remind Buzzer Function | Sounds a buzzer when the driver door is opened with the light control switch in the tail or head position. | Enable | $00:Disable,$01:Enable | Main Body ECU
(Multiplex Network Body ECU) |
| Light up Clearance Lights at Door Unlock Function | Setting of the light up clearance lights at door unlock function | Enable | $00:Disable,$01:Enable | Main Body ECU
(Multiplex Network Body ECU) |
| Brightness Level Adjust (Lowering) | Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A | Normal | $00:Normal,$01:Dark2,$02:Dark1,$03:Light1,$04:Light2 | Main Body ECU
(Multiplex Network Body ECU) |
| Brightness Level Adjust (Canceling) | Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B | Normal | $00:Normal,$01:Dark2,$02:Dark1,$03:Light1,$04:Light2 | Main Body ECU
(Multiplex Network Body ECU) |
| Sensitivity Adjust | Adjusts the sensitivity of the automatic light control system.*C | Normal | $00:Normal,$01:Dark2,$02:Dark1,$03:Light1,$04:Light2 | Main Body ECU
(Multiplex Network Body ECU) |
| Light Auto OFF Delay Setting | Taillight off timing setting when light control switch is in tail or head position. | 30 s | $00:OFF,$01:30sec,$02:60sec,$03:90sec | Main Body ECU
(Multiplex Network Body ECU) |
The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.
*A
*B
*C
Customizing with the multi-display
Enter the following menus: MENU / Setup / Vehicle / Vehicle customisation / Lights settings.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Light Sensor sensitivity | Adjusts the sensitivity of the automatic light control system.*A | 0 | -2, -1, 0, +1 or +2 | Main Body ECU (Multiplex Network Body ECU) |
The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.
*A