Home › Brake › PARKING BRAKE › ELECTRIC PARKING BRAKE SYSTEM (for HV Model) › 2020.08–2021.07
RM3700E _54 Brake _093729 PARKING BRAKE _0444807 ELECTRIC PARKING BRAKE SYSTEM(for HV Model) U

PARKING BRAKE  ELECTRIC PARKING BRAKE SYSTEM(for HV Model)  TERMINALS OF ECU  


CHECK PARKING BRAKE ECU (BRAKE ACTUATOR ASSEMBLY)


C381992C27
3.406,0.26 3.823,0.542 0.417,0.281 0.125,0.104 0.438,0.302 0.313,0.198 10 false *a 3.51,0.333 3.969,0.531 0.458,0.198 10 false A95
*a Front view of wire harness connector (to Parking Brake ECU (Brake Actuator Assembly)) - -


a.

Disconnect the A95 parking brake ECU (brake actuator assembly) connector.


b.

Measure the voltage and resistance according to the value (s) in the table below.

Terminal No. (Symbol) Terminal Description Condition Specified Condition
A95-9 (BEPB) - Body ground Parking brake Ignition supply Ignition switch off 11 to 14 V
A95-26 (IG) - Body ground IG Ignition supply Ignition switch ON 8 to 16 V
A95-2 (EGND) - Body ground Ground Always Below 1 Ω
A95-14 (SWI1) - Body ground Electric parking brake switch assembly - -
A95-24 (SWI2) - Body ground Electric parking brake switch assembly - -
A95-20 (SWO1) - Body ground Electric parking brake switch assembly - -
A95-22 (SWO2) - Body ground Electric parking brake switch assembly - -
A95-4 (MRR+) - Body ground Parking brake motor RH (parking brake actuator assembly RH) (+) - -
A95-3 (MRR-) - Body ground Parking brake motor RH (parking brake actuator assembly RH) (-) - -
A95-7 (MRL+) - Body ground Parking brake motor LH (parking brake actuator assembly LH) (+) - -
A95-8 (MRL-) - Body ground Parking brake motor LH (parking brake actuator assembly LH) (-) - -
A95-27 (SPD) - Body ground Vehicle speed direct input - -
A95-12 (CANH) - Body ground CAN communication line H - -
A95-11 (CANL) - Body ground CAN communication line L - -