| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | DECK TRIM SIDE PANEL ASSEMBLY RH | 64730B | - | - | - |
| 2 | DOOR CONTROL RECEIVER | 89741 | - | - | - |
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during the door control receiver removal/installation are shown below.
64730B
1.REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH
89741
2.REMOVE DOOR CONTROL RECEIVER
Do not drop, strike or otherwise subject the door control receiver to impact.
If the door control receiver is subjected to an impact, replace it with a new one.
Remove the bolt.
Disengage the guides.
Disconnect the connector to remove the door control receiver.