| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | FRONT SEAT CENTER AIRBAG ASSEMBLY | 739H0 | - | - | - |
| 2 | FRONT SEAT AIRBAG ASSEMBLY | 73910A | - | - | - |
| 3 | SEPARATE TYPE FRONT SEATBACK COVER WITH PAD | - | - | - | - |
|
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
Use the same procedure for the driver side and front passenger side.
The procedure listed below is for the driver side.
739H0
1.INSTALL FRONT SEAT CENTER AIRBAG ASSEMBLY
Install the front seat center airbag assembly with 2 new nuts.
Do not reuse the nut.
If the installation surface or surrounding area of the front seat airbag assembly is deformed or damaged, replace the front seatback frame sub-assembly LH with a new one.
Engage the clamp.
73910A
2.INSTALL FRONT SEAT AIRBAG ASSEMBLY
Install the front seat airbag assembly with 2 new nuts.
Do not reuse the nut.
If the installation surface or surrounding area of the front seat airbag assembly is deformed or damaged, replace the front seatback frame sub-assembly LH with a new one.
Engage the clamp.
3.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
Front seat assembly (for Manual seat):
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>REASSEMBLY
Front seat assembly (for Power seat):
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Power Seat)>REASSEMBLY