| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | FAN AND GENERATOR V BELT | 16361A | - | - | - |
| 2 | INSPECT FAN AND GENERATOR V BELT | 16361A | - | - | - |
| 3 | ENGINE UNDER COVER RH | 51441C | - | - | - |
| 4 | NO. 1 ENGINE UNDER COVER ASSEMBLY | 51410 | - | - | - |
16361A
1.INSTALL FAN AND GENERATOR V BELT
When reusing the fan and generator V belt, check the ribs and back of the fan and generator V belt for wear and cracks. If wear or a crack that reaches the core (at more than 1 point) is found, replace the fan and generator V belt.
| *1 | Crankshaft Pulley Assembly | *2 | Generator Assembly |
| *3 | Compressor with Pulley Assembly | - | - |
Set the fan and generator V belt onto each pulley as shown in the illustration.
Turn the V-ribbed belt tensioner assembly counterclockwise and remove the 5 mm hexagon wrench.
51441C
3.INSTALL ENGINE UNDER COVER RH
51410
4.INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY