Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model) › 2020.08–2021.07
RM3700E _54 Brake _093745 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0446873 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model)  C052696  Steering Angle Sensor Module Component Internal Failure  


DESCRIPTION

The skid control ECU (brake booster with master cylinder assembly) outputs this DTC when it receives an internal malfunction signal from the steering sensor.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
C052696 Steering Angle Sensor Module Component Internal Failure When the lGR terminal voltage is 9.5 V or more, a malfunction signal from the steering sensor is detected. Steering sensor Brake/EPB A

PROCEDURE

1.REPLACE STEERING SENSOR

NEXT

END