Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model) › 2020.08–2021.07
RM3700E _54 Brake _093745 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0446873 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model)  U011087  Lost Communication with Drive Motor Control Module "A" Missing Message  U012587  Lost Communication With Multi-axis Acceleration Sensor Module Missing Message  U012687  Lost Communication with Steering Angle Sensor Module Missing Message  U015187  Lost Communication with Restraints Control Module Missing Message  U029387  Lost Communication with Hybrid/EV Powertrain Control Module Missing Message  U110787  Lost Communication with Power Management Module Missing Message  U115087  Lost Communication with Hybrid Powertrain Control Module (ch2) Missing Message  U130857  Software Incompatibility with Pre-collision Control Module Invalid / Incompatible Software Component  U130957  Software Incompatibility with Clearance Warning Control Module Invalid / Incompatible Software Component  U149257  Software incompatibility with Hybrid/EV Powertrain Control Module Invalid/Incompatible Software Component  


DESCRIPTION

The airbag sensor assembly has a built-in yaw rate and acceleration sensor.

The skid control ECU (brake booster with master cylinder assembly) receives signals from the hybrid vehicle control ECU, steering sensor, certification ECU (smart key ECU assembly), hybrid motor control inverter assembly and yaw rate and acceleration sensor (airbag sensor assembly) via CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
U011087 Lost Communication with Drive Motor Control Module "A" Missing Message Any of the following is detected:
·

When terminal IGP voltage is 9.5 V or more, data from the hybrid motor control inverter assembly cannot be received for 2 seconds or more.

·

When terminal IGP voltage is 9.5 V or more, the condition in which data from the hybrid motor control inverter assembly cannot be received once or more within 5 seconds occurs 10 times in succession.


·

CAN communication line

·

Hybrid motor control inverter assembly

·

Skid control ECU (brake booster with master cylinder assembly)


Brake/EPB B
U012587 Lost Communication With Multi-axis Acceleration Sensor Module Missing Message Any of the following is detected:
·

Acceleration sensor communication is disabled for 1 second or more.

·

Acceleration sensor communication is disabled once or more per 5 seconds 10 times or more within 60 seconds.


·

CAN communication line

·

Acceleration sensor (airbag sensor assembly)

·

Skid control ECU (brake booster with master cylinder assembly)


Brake/EPB B
U012687 Lost Communication with Steering Angle Sensor Module Missing Message Any of the following is detected:
·

Steering sensor communication is disabled for 1 second or more.

·

Steering sensor communication is disabled once or more per 5 seconds10 times or more within 60 seconds.


·

CAN communication line

·

Steering sensor

·

Skid control ECU (brake booster with master cylinder assembly)


Brake/EPB B
U015187 Lost Communication with Restraints Control Module Missing Message When terminal IGP voltage is 9.5 V or more, data from the airbag sensor assembly cannot be received for 5 seconds or more.
·

CAN communication line

·

Airbag sensor assembly

·

Skid control ECU (brake booster with master cylinder assembly)


Brake/EPB B
U029387 Lost Communication with Hybrid/EV Powertrain Control Module Missing Message Any of the following is detected:
·

When terminal IGP voltage is 9.5 V or more, data from the hybrid vehicle control ECU cannot be received for 2 seconds or more.

·

When terminal IGP voltage is 9.5 V or more, the condition in which data from the hybrid vehicle control ECU cannot be received once or more within 5 seconds occurs 10 times in succession.


·

CAN communication line

·

Hybrid vehicle control ECU

·

Skid control ECU (brake booster with master cylinder assembly)


Brake/EPB B
U110787 Lost Communication with Power Management Module Missing Message Push start switch data is invalid for 3 seconds or more.
·

CAN communication line

·

Certification ECU (smart key ECU assembly)

·

Skid control ECU (brake booster with master cylinder assembly)


Brake/EPB B
U115087 Lost Communication with Hybrid Powertrain Control Module (ch2) Missing Message Any of the following is detected:
·

When terminal IGP voltage is 9.5 V or more, data from the hybrid vehicle control ECU cannot be received for 2 seconds or more.

·

When terminal IGP voltage is 9.5 V or more, the condition in which data from the hybrid vehicle control ECU cannot be received once or more within 5 seconds occurs 10 times in succession.


·

CAN communication line

·

Hybrid vehicle control ECU

·

Skid control ECU (brake booster with master cylinder assembly)


Brake/EPB B
U130857 Software Incompatibility with Pre-collision Control Module Invalid / Incompatible Software Component Any of the following is detected:
·

The information stored in the skid control ECU and the specification information of the pre-collision system do not match.

·

Communication with the forward recognition camera is not established for 1 second or more.


·

CAN communication line

·

Forward recognition camera

·

Skid control ECU (brake booster with master cylinder assembly)


Brake/EPB B
U130957 Software Incompatibility with Clearance Warning Control Module Invalid / Incompatible Software Component Any of the following is detected:
·

The information stored in the skid control ECU and the specification information of the clearance warning system do not match.

·

Communication with the clearance warning ECU is not established for 1 second or more.


·

CAN communication line

·

Clearance warning ECU assembly

·

Skid control ECU (brake booster with master cylinder assembly)


Brake/EPB B
U149257 Software incompatibility with Hybrid/EV Powertrain Control Module Invalid/Incompatible Software Component The information stored in the skid control ECU and the specification information of the HV/EV system do not match when the information collation starts.
·

CAN communication line

·

Hybrid vehicle control ECU

·

Skid control ECU (brake booster with master cylinder assembly)


Brake/EPB B

PROCEDURE

1.CLEAR DTC

Pre-procedure1

a.

None


Procedure1

b.

Clear the DTCs.

Chassis > Brake/EPB > Clear DTCs
50002 435
Result:
Proceed to
NEXT



Post-procedure1

c.

Turn the ignition switch off.



NEXT

2.RECONFIRM DTC
2.RECONFIRM DTC
a.

Check if the same DTC is output.

Chassis > Brake/EPB > Trouble Codes
50001 435
Result:
Result Proceed to
U011087, U012587, U012687, U015187, U029387, U110787, U115087, U130857, U130957 or U149257 is output A
DTCs are not output B
None of the above conditions are met C




A

B

C

GO TO DIAGNOSTIC TROUBLE CODE CHART