These DTCs are stored if there is a malfunction in the CAN communication system connected to the clearance warning ECU assembly.
If CAN communication system DTCs are stored, they may also be stored in other systems.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| U023387 | Lost Communication with Side Obstacle Detection Control Module "B" Missing Message | The clearance warning ECU assembly is unable to receive data from the blind spot monitor sensor LH (B) for 5 seconds or more | CAN communication system | Clearance Warning | B |
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Check for DTCs.
| Result | Proceed to |
|---|---|
| U023387 is output | A |
| DTCs are not output | B |
| None of the above conditions are met | C |
A
for HV Model: Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>HOW TO PROCEED WITH TROUBLESHOOTING
for Gasoline Model: Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for Gasoline Model)>HOW TO PROCEED WITH TROUBLESHOOTING
B
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
C