Home › Brake › PARKING BRAKE › ELECTRIC PARKING BRAKE ACTUATOR (for AWD)
RM3700E _54 Brake _093729 PARKING BRAKE _0447174 ELECTRIC PARKING BRAKE ACTUATOR(for AWD) G

PARKING BRAKE  ELECTRIC PARKING BRAKE ACTUATOR(for AWD)  INSPECTION  


PROCEDURE

Hide 46310B 1.INSPECT PARKING BRAKE ACTUATOR ASSEMBLY LH

a.

Parking brake actuator assembly LH operation inspection

i.
C308420C50
1.542,1.813 1.927,2.052 0.385,0.24 0.75,0.938 0.365,0.938 true 1.146,0.927 1.563,0.927 true 1.083,2.833 1.5,2.833 true 1.917,2.833 2.333,2.833 true 0.094,0.104 0.333,0.281 0.24,0.177 10 false *a 1.583,0.844 1.802,1.021 0.219,0.177 10 true *b 0.188,0.833 0.406,1.042 0.219,0.208 10 true *c 0.917,2.74 1.354,3.083 0.438,0.344 10 false + 2.417,2.729 3,3.063 0.583,0.333 10 false - 1.646,1.865 1.875,2.063 0.229,0.198 10 false u3
*a Component without harness connected
(Parking Brake Actuator Assembly LH)
*b Lock
*c Release


Apply voltage to the terminals of the parking brake actuator assembly LH and check that it operates as specified.

OK:
Tester Connection Specified Condition

Click Location & Routing(u3)Location & Routing

Click Connector(u3)Body>No. 1 Parking Brake Wire Assembly / No. 2 Parking Brake Wire Assembly>Parking Brake Actuator Assembly LH

Auxiliary battery positive (+) - u3-2 (+)
Auxiliary battery negative (-) - u3-1 (-)
Lock
Auxiliary battery positive (+) - u3-1 (-)
Auxiliary battery negative (-) - u3-2 (+)
Release



ii.

If the result is not as specified, replace the parking brake actuator assembly LH.



Hide 46310A 2.INSPECT PARKING BRAKE ACTUATOR ASSEMBLY RH

a.

Parking brake actuator assembly RH operation inspection

i.
C308420C51
1.5,1.844 1.906,2.063 0.406,0.219 0.75,0.938 0.365,0.938 true 1.146,0.927 1.563,0.927 true 1.083,2.833 1.5,2.833 true 1.917,2.833 2.333,2.833 true 0.094,0.104 0.333,0.281 0.24,0.177 10 false *a 1.583,0.844 1.802,1.021 0.219,0.177 10 true *b 0.188,0.833 0.406,1.042 0.219,0.208 10 true *c 0.917,2.74 1.354,3.083 0.438,0.344 10 false + 2.417,2.729 3,3.063 0.583,0.333 10 false - 1.615,1.885 1.844,2.073 0.229,0.188 10 false u1
*a Component without harness connected
(Parking Brake Actuator Assembly RH)
*b Lock
*c Release


Apply voltage to the terminals of the parking brake actuator assembly RH and check that it operates as specified.

OK:
Tester Connection Specified Condition

Click Location & Routing(u1)Location & Routing

Click Connector(u1)Body>No. 1 Parking Brake Wire Assembly / No. 2 Parking Brake Wire Assembly>Parking Brake Actuator Assembly RH

Auxiliary battery positive (+) - u1-2 (+)
Auxiliary battery negative (-) - u1-1 (-)
Lock
Auxiliary battery positive (+) - u1-1 (-)
Auxiliary battery negative (-) - u1-2 (+)
Release



ii.

If the result is not as specified, replace the parking brake actuator assembly RH.