for Gasoline Model:
The stop light switch assembly and skid control ECU (brake actuator assembly) output stop light signals. If the skid control ECU (brake actuator assembly) detects a malfunction in circuits related to the stop light, it informs the millimeter wave radar sensor assembly via CAN communication, and DTC C142571 is stored.
for HV Model:
The stop light switch assembly and skid control ECU (brake booster with master cylinder assembly) output stop light signals. If the skid control ECU (brake booster with master cylinder assembly) detects a malfunction in circuits related to the stop light, it informs the millimeter wave radar sensor assembly via CAN communication, and DTC C142571 is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| C142571 | Stop Light Relay Actuator Stuck | for Gasoline Model:
When the ignition switch is ON for 3 seconds or more, a stop light circuit malfunction signal is received from the skid control ECU (brake actuator assembly) for 1 second or more. for HV Model: When the ignition switch is ON for 3 seconds or more, a stop light circuit malfunction signal is received from the skid control ECU (brake booster with master cylinder assembly) for 1 second or more. |
Electronically controlled brake system | Pre-Collision System | B |
Choose the model to be inspected.
| Result | Proceed to |
|---|---|
| for Gasoline Model | A |
| for HV Model | B |
A
B
If DTC C142571 is output by the pre-collision system, perform troubleshooting for the electronically controlled brake system.
| Proceed to |
|---|
| NEXT |
NEXT
If DTC C142571 is output by the pre-collision system, perform troubleshooting for the electronically controlled brake system.
| Proceed to |
|---|
| NEXT |
NEXT