Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › AUTOMATIC HIGH BEAM SYSTEM
RM3700E _95 ADAS / AD _095278 ADVANCED DRIVER ASSISTANCE SYSTEM _0448344 AUTOMATIC HIGH BEAM SYSTEM C

ADVANCED DRIVER ASSISTANCE SYSTEM  AUTOMATIC HIGH BEAM SYSTEM  U012687  Lost Communication with Steering Angle Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module Missing Message  U014087  Lost Communication with Body Control Module Missing Message  


DESCRIPTION

These DTCs are stored if a CAN communication malfunction occurs between the forward recognition camera and other ECUs.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority Note
U012687 Lost Communication with Steering Angle Sensor Module Missing Message The forward recognition camera does not receive data from the steering sensor for approximately 5 seconds or more. CAN communication system Front Recognition Camera (Front Lighting Control) B -
U012987 Lost Communication with Brake System Control Module Missing Message
for HV Model

The forward recognition camera does not receive data from the brake booster with master cylinder assembly for approximately 5 seconds or more.


for Gasoline Model

The forward recognition camera does not receive data from the skid control ECU (brake actuator assembly) for approximately 5 seconds or more.


CAN communication system Front Recognition Camera (Front Lighting Control) B -
U014087 Lost Communication with Body Control Module Missing Message The forward recognition camera does not receive data from the main body ECU (multiplex network body ECU) for approximately 5 seconds or more. CAN communication system Front Recognition Camera (Front Lighting Control) B -

PROCEDURE

1.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Front Recognition Camera (Front Lighting Control) > Clear DTCs
50002 433

Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTC
2.CHECK FOR DTC

Pre-procedure 1

a.

Turn the ignition switch to ON.


b.

Wait 10 seconds or more.


c.

Turn the GTS on.


Procedure 1

d.

Check for DTCs.

Body Electrical > Front Recognition Camera (Front Lighting Control) > Trouble Codes
50001 433
Result:
Proceed to
OK
NG



Post-procedure 1

e.

None



OK

NG