Home › Brake › PARKING BRAKE › ELECTRIC PARKING BRAKE SYSTEM (for HV Model) › 2020.08–2021.07
RM3700E _54 Brake _093729 PARKING BRAKE _0444807 ELECTRIC PARKING BRAKE SYSTEM(for HV Model) C

PARKING BRAKE  ELECTRIC PARKING BRAKE SYSTEM(for HV Model)  C13B004  Electric Parking Brake Control Module Performance System Internal Failure  C13B046  Electric Parking Brake Control Module Performance Calibration / Parameter Memory Failure  C13CF1C  Left Electric Parking Brake Actuator Current Sensor Circuit Voltage Out of Range  C13D41C  Right Electric Parking Brake Actuator Current Sensor Circuit Voltage Out of Range  


DESCRIPTION

The following DTCs are stored when a malfunction occurs in the parking brake ECU (brake actuator assembly).

DTC No. Detection Item DTC Detection Condition Trouble Area Memory DTC Output from Priority Note
C13B004 Electric Parking Brake Control Module Performance System Internal Failure Parking brake ECU (brake actuator assembly) internal malfunction Parking brake ECU (brake actuator assembly) DTC stored Electric Parking Brake A An electric parking brake system malfunction is displayed on the multi-information display.
C13B046 Electric Parking Brake Control Module Performance Calibration / Parameter Memory Failure Parking brake ECU (brake actuator assembly) internal malfunction Parking brake ECU (brake actuator assembly) DTC stored Electric Parking Brake A An electric parking brake system malfunction is displayed on the multi-information display.
C13CF1C Left Electric Parking Brake Actuator Current Sensor Circuit Voltage Out of Range Parking brake ECU (brake actuator assembly) internal malfunction Parking brake ECU (brake actuator assembly) DTC stored Electric Parking Brake A An electric parking brake system malfunction is displayed on the multi-information display.
C13D41C Right Electric Parking Brake Actuator Current Sensor Circuit Voltage Out of Range Parking brake ECU (brake actuator assembly) internal malfunction Parking brake ECU (brake actuator assembly) DTC stored Electric Parking Brake A An electric parking brake system malfunction is displayed on the multi-information display.

CAUTION / NOTICE / HINT

NOTICE:
·

To ensure that the electric parking brake does not operate, wait for 3 minutes or more with the ignition switch off, the driver door closed, and the brake pedal not depressed, then disconnect each connector, fuse and relay.

·

After replacing the parking brake ECU (brake actuator assembly), perform "Calibration".

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model)>UTILITY

·

When replacing the parking brake ECU (brake actuator assembly), operate the electric parking brake switch assembly as the parking brake indicator light blinks when the ignition switch is first turned ON.



PROCEDURE

1.REPLACE PARKING BRAKE ECU (BRAKE ACTUATOR ASSEMBLY)

NEXT

END