33402
1.INSPECT REVERSE IDLER GEAR SUB-ASSEMBLY
Using a caliper gauge, inspect the reverse idler gear sub-assembly.
| Specified Condition |
|---|
| 25.056 to 25.074 mm |
| 0.9865 to 0.9872 in. |
If the result is not as specified, replace the reverse idler gear sub-assembly.
Using a micrometer, inspect the reverse idler gear shaft.
| Specified Condition |
|---|
| 24.984 to 25.000 mm |
| 0.9836 to 0.9843 in. |
If the result is not as specified, replace the reverse idler gear shaft.