Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VSC OFF SWITCH (for Instrument Panel Side) › from 2021.07
RM3700E _54 Brake _093745 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0480811 VSC OFF SWITCH(for Instrument Panel Side) G

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VSC OFF SWITCH(for Instrument Panel Side)  INSPECTION  


PROCEDURE

Hide 84988L 1.INSPECT VSC OFF SWITCH

a.
C381450C15
1.479,0.094 1.979,0.344 0.5,0.25 1.177,1.958 1.344,1.958 1.344,1.958 1.344,1.292 true 2.198,1.948 2.031,1.948 2.031,1.948 2.031,1.281 true 0.99,1.896 1.448,2.115 0.458,0.219 10 false + 2.271,1.844 2.615,2.063 0.344,0.219 10 false E 0.177,0.125 0.521,0.344 0.344,0.219 10 false *a 1.573,0.146 2.188,0.344 0.615,0.198 10 false H154
*a Component without harness connected
(VSC OFF Switch)


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H154)Location & Routing

Click Connector(H154)Instrument Panel>Instrument Panel Wire / Speaker Wire>VSC Off Switch

H154-2 (E) - H154-5 (+) Switch pushed Below 1 Ω
H154-2 (E) - H154-5 (+) Switch not pushed 10 kΩ or higher


If the result is not as specified, replace the VSC OFF Switch.



b.
C381450C16
1.469,0.115 1.969,0.365 0.5,0.25 0.927,1.885 1.094,1.885 1.094,1.885 1.094,1.302 true 2.406,1.875 2.24,1.875 2.24,1.875 2.24,1.292 true 0.594,1.771 1.063,2.042 0.469,0.271 10 false ILL+ 2.469,1.771 2.875,2.01 0.406,0.24 10 false ILL- 0.104,0.115 0.51,0.354 0.406,0.24 10 false *a 1.573,0.167 2.188,0.365 0.615,0.198 10 false H154
*a Component without harness connected
(VSC OFF Switch)


Check the illumination.

i.

Apply auxiliary battery voltage to the VSC OFF Switch.

OK:
Tester Connection Condition Specified Condition

Click Location & Routing(H154)Location & Routing

H154-6 (ILL+) - H154-1 (ILL-) H154-6 (ILL+) - Auxiliary battery positive (+)
H154-1 (ILL-) - Auxiliary battery negative (-)
The VSC OFF Switch illumination illuminates.


If the result is not as specified, replace the VSC OFF Switch.