81536D
1.INSPECT TAIL LIGHT LED (for LH Side)
Check that the tail light LED
| *a | Component without harness connected
(Tail Light LED) |
Apply auxiliary battery voltage to the tail light LED and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| O105-2 (B) - Auxiliary battery positive (+)
O105-1 (E) - Auxiliary battery negative (-) |
Tail light LED comes on |
If the result is not as specified, replace the Tail light LED.
81536D
2.INSPECT TAIL LIGHT LED (for RH Side)
Check that the tail light LED
| *a | Component without harness connected
(Tail Light LED) |
Apply auxiliary battery voltage to the tail light LED and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| O108-2 (B) - Auxiliary battery positive (+)
O108-1 (E) - Auxiliary battery negative (-) |
Tail light LED comes on |
If the result is not as specified, replace the Tail light LED.
81591B
3.INSPECT REAR LIGHT LENS AND BODY LH
Check that the rear light lens and body LH
| *a | Component without harness connected
(Rear Light Lens and Body LH) |
Apply auxiliary battery voltage to the rear light lens and body LH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Y12-4 (TRN) - Auxiliary battery positive (+)
Y12-2 (E) - Auxiliary battery negative (-) |
Rear turn signal light comes on |
If there is something wrong with the rear light lens and body LH, measure the resistance between the terminals for an open or short in the wiring.
If no abnormality is found in the wiring, replace the rear light lens and body LH.
If abnormality is found in the wiring, replace the rear light socket & wire LH.
81581C
4.INSPECT REAR LIGHT LENS AND BODY RH
Check that the rear light lens and body RH
| *a | Component without harness connected
(Rear Light Lens and Body RH) |
Apply auxiliary battery voltage to the rear light lens and body RH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Y14-4 (TRN) - Auxiliary battery positive (+)
Y14-2 (E) - Auxiliary battery negative (-) |
Rear turn signal light comes on |
If there is something wrong with the rear light lens and body RH, measure the resistance between the terminals for an open or short in the wiring.
If no abnormality is found in the wiring, replace the rear light lens and body RH.
If abnormality is found in the wiring, replace the rear light socket & wire RH.
81536G
5.INSPECT BACK-UP LIGHT LED (for LHD)
Check that the back-up light LED
| *a | Component without harness connected
(Back-up Light LED) |
Apply auxiliary battery voltage to the back-up light LED and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Y14-6 (B) - Auxiliary battery positive (+)
Y14-2 (E) - Auxiliary battery negative (-) |
Back-up light LED comes on |
If there is something wrong with the back-up light LED, measure the resistance between the terminals for an open or short in the wiring.
If no abnormality is found in the wiring, replace the back-up light LED.
If abnormality is found in the wiring, replace the rear light socket & wire LH.
81536G
6.INSPECT BACK-UP LIGHT LED (for RHD)
Check that the back-up light LED
| *a | Component without harness connected
(Back-up Light LED) |
Apply auxiliary battery voltage to the back-up light LED and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Y12-6 (B) - Auxiliary battery positive (+)
Y12-2 (E) - Auxiliary battery negative (-) |
Back-up light LED comes on |
If there is something wrong with the back-up light LED, measure the resistance between the terminals for an open or short in the wiring.
If no abnormality is found in the wiring, replace the back-up light LED.
If abnormality is found in the wiring, replace the rear light socket & wire LH.
8158AD
7.INSPECT REAR FOG LIGHT LED (for LHD)
Check that the rear fog light LED
| *a | Component without harness connected
(Rear Fog Light LED) |
Apply auxiliary battery voltage to the rear fog light LED and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Y12-3 (B) - Auxiliary battery positive (+)
Y12-2 (E) - Auxiliary battery negative (-) |
Rear fog light LED comes on |
If there is something wrong with the rear fog light LED, measure the resistance between the terminals for an open or short in the wiring.
If no abnormality is found in the wiring, replace the rear fog light LED.
If abnormality is found in the wiring, replace the rear light socket & wire RH.
8158AD
8.INSPECT REAR FOG LIGHT LED (for RHD)
Check that the rear fog light LED
| *a | Component without harness connected
(Rear Fog Light LED) |
Apply auxiliary battery voltage to the rear fog light LED and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Y14-3 (B) - Auxiliary battery positive (+)
Y14-2 (E) - Auxiliary battery negative (-) |
Rear fog light LED comes on |
If there is something wrong with the rear fog light LED, measure the resistance between the terminals for an open or short in the wiring.
If no abnormality is found in the wiring, replace the rear fog light LED.
If abnormality is found in the wiring, replace the rear light socket & wire RH.