81080J
1.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY
Check that the LED illuminates.
| *a | Component without harness connected
(No. 1 Interior Illumination Light Assembly) |
Apply auxiliary battery voltage to the No. 1 interior illumination light assembly and check that the LED illuminates.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
Click Location & Routing(H9)Location & Routingewd_type=routing;type=c;code=H9 Click Connector(H9)Instrument Panel>Instrument Panel Wire / Speaker Wire>Console Box Illumination Light Assemblyewd_type=component;type=c;code=H9;pinno=2,1 |
||
| H9-2 (ILL+) - H9-1 (ILL-) | H9-2 (ILL+) → Auxiliary battery positive (+)
H9-1 (ILL-) → Auxiliary battery negative (-) |
LED illuminates |
If the result is not as specified, replace the No. 1 interior illumination light assembly.