Home › Vehicle Interior › LIGHTING (INT) › AMBIENT LIGHT › from 2021.07
RM3700E _58 Vehicle Interior _093025 LIGHTING (INT) _0482061 AMBIENT LIGHT G

LIGHTING (INT)  AMBIENT LIGHT  INSPECTION  


PROCEDURE

Hide 81080W 1.INSPECT NO. 3 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for LH Side)

a.

Check that the LED illuminates.

i.
E363622C06
1.531,0.25 1.865,0.5 0.333,0.25 1.25,1.417 1.583,1.135 true 1.833,1.125 2.167,1.417 true 0.771,0.333 1.083,0.49 0.313,0.156 10 false *a 1.198,1.438 1.51,1.594 0.313,0.156 10 false + 2.188,1.438 2.5,1.594 0.313,0.156 10 false - 1.615,0.302 1.927,0.458 0.313,0.156 10 false L3
*a Component without harness connected
(No. 3 Interior Illumination Light Assembly)


Apply auxiliary battery voltage to the No. 3 interior illumination light assembly and check that the LED illuminates.

OK:
Tester Connection Condition Specified Condition

Click Location & Routing(L3)Location & Routing

Click Connector(L3)Body>Front Door Wire LH / Television Camera Wire>Front Door Trim Light LH (No. 1 Interior Illumination Light Assembly LH)

L3-2 (+) - L3-1 (-) L3-2 (+) → Auxiliary battery positive (+)
L3-1 (-) → Auxiliary battery negative (-)
LED illuminates



ii.

If the result is not as specified, replace the No. 3 interior illumination light assembly.



Hide 81080W 2.INSPECT NO. 3 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for RH Side)

a.

Check that the LED illuminates.

i.
E363622C07
1.5,0.167 1.833,0.417 0.333,0.25 1.25,1.417 1.583,1.135 true 1.833,1.125 2.167,1.417 true 0.771,0.333 1.083,0.49 0.313,0.156 10 false *a 1.198,1.438 1.51,1.594 0.313,0.156 10 false + 2.177,1.438 2.49,1.594 0.313,0.156 10 false - 1.594,0.219 1.906,0.417 0.313,0.198 10 false K3
*a Component without harness connected
(No. 3 Interior Illumination Light Assembly)


Apply auxiliary battery voltage to the No. 3 interior illumination light assembly and check that the LED illuminates.

OK:
Tester Connection Condition Specified Condition

Click Location & Routing(K3)Location & Routing

Click Connector(K3)Body>Front Door Wire RH / Television Camera Wire>Front Door Trim Light RH (No. 1 Interior Illumination Light Assembly RH)

K3-2 (+) - K3-1 (-) K3-2 (+) → Auxiliary battery positive (+)
K3-1 (-) → Auxiliary battery negative (-)
LED illuminates



ii.

If the result is not as specified, replace the No. 3 interior illumination light assembly.