56111
1.INSPECT WINDSHIELD GLASS (for Cold Area Specification Vehicles)
Check the resistance.
| *a | Component without harness connected
Windshield Glass) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
Click Location & Routing(A112)Location & Routingewd_type=routing;type=c;code=A112 Click Connector(A112)Engine Compartment>Engine Room Main Wire>Front Wiper Deicer Relayewd_type=component;type=c;code=A112;pinno=1,2 |
||
| A112-1(B) - A112-2(E) | Always | Below 1 Ω |
If the result is not as specified, replace the windshield glass.