Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER MOTOR › from 2021.07
RM3700E _59 Vehicle Exterior _092999 WIPER / WASHER _0438353 FRONT WIPER MOTOR G

WIPER / WASHER  FRONT WIPER MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85110 1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)

a.

for LH Side:

i.

Operate the windshield wiper motor assembly.


ii.

Stop the windshield wiper motor assembly operation.


iii.
E460260C01
1.667,2.281 1.458,2.604 true 1.688,2.188 1.854,2.354 0.167,0.167 10 true *a 1.177,2.406 1.302,2.583 0.125,0.177 10 true A 1.167,2.698 1.292,2.875 0.125,0.177 10 true A
*a Alignment Mark


Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Standard Clearance:
Area Measurement
A 10 mm (0.394 in.)


OK:

The front wiper stops at the position shown in the illustration.




b.

for RH Side:

i.

Operate the windshield wiper motor assembly.


ii.

Stop the windshield wiper motor assembly operation.


iii.
E460261C01
1.458,2.313 1.188,2.635 true 1.406,2.281 1.604,2.458 0.198,0.177 10 true *a 0.802,2.615 0.938,2.781 0.135,0.167 10 true A 0.917,2.333 1.052,2.5 0.135,0.167 10 true A
*a Alignment Mark


Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Standard Clearance:
Area Measurement
A 10 mm (0.394 in.)


OK:

The front wiper stops at the position shown in the illustration.




Hide 85110 2.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)

a.

for LH Side:

i.

Operate the windshield wiper motor assembly.


ii.

Stop the windshield wiper motor assembly operation.


iii.
B586313C01
1.969,2.635 1.552,2.385 true 1.344,2.271 1.531,2.438 0.188,0.167 10 true *a 2.104,2.354 2.229,2.51 0.125,0.156 10 true A 2.208,2.625 2.365,2.771 0.156,0.146 10 true A
*a Alignment Mark


Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Standard Clearance:
Area Measurement
A 10 mm (0.394 in.)


OK:

The front wiper stops at the position shown in the illustration.




b.

for RH Side:

i.

Operate the windshield wiper motor assembly.


ii.

Stop the windshield wiper motor assembly operation.


iii.
B586314C01
1.938,2.688 1.729,2.427 true 1.531,2.313 1.698,2.479 0.167,0.167 10 true *a 2.115,2.76 2.25,2.927 0.135,0.167 10 true A 2.115,2.469 2.25,2.635 0.135,0.167 10 true A
*a Alignment Mark


Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Standard Clearance:
Area Measurement
A 10 mm (0.394 in.)


OK:

The front wiper stops at the position shown in the illustration.