85035
1.INSPECT WASHER NOZZLE SUB-ASSEMBLY (for TMC Made)
Operate the washer nozzle sub-assemblies and check the position that the washer fluid contacts the windshield.
Washer fluid contacts the windshield in the areas shown in the illustration.
| *a | Upper Limit | *b | Standard |
| *c | Lower Limit | - | - |
|
Measurement | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 386.2 mm (15.20 in.) | B | 143.6 mm (5.65 in.) |
If the result is not as specified, replace the washer nozzle sub-assembly.
85035
2.INSPECT WASHER NOZZLE SUB-ASSEMBLY (for TMMF Made)
Operate the washer nozzle sub-assemblies and check the position that the washer fluid contacts the windshield.
Washer fluid contacts the windshield in the areas shown in the illustration.
| *a | Upper Limit | *b | Standard |
| *c | Lower Limit | - | - |
|
Measurement | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 376 mm (14.80 in.) | B | 155.5 mm (6.12 in.) |
If the result is not as specified, replace the washer nozzle sub-assembly.