ECM
The standard voltage and resistance between each pair of ECM terminals is shown in the table below.
The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard voltage or resistance for that pair of terminals shown in the "Specified Condition" column.
Use the illustration above as a reference for the ECM terminals.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| A54-52 (CLS) - A54-44 (E2CL) | Clutch pedal stroke sensor assembly signal | Ignition switch ON, clutch pedal fully released | 0.2 to 1.5 V |
| Ignition switch ON, clutch pedal fully depressed | 2.5 to 4.8 V | ||
| A54-43 (VCCL) - A54-44 (E2CL) | Power source of clutch pedal stroke sensor assembly | Ignition switch ON | 4.5 to 5.5 V |
| A54-38 (MTMS) - A54-10 (E1) | iMT switch (combination switch assembly) signal | Ignition switch ON, iMT switch (combination switch assembly) being pushed | Below 1.5 V |
| Ignition switch ON, iMT switch (combination switch assembly) not being pushed | 11 to 14 V | ||
| D51-130 (NIM+) - D51-129 (NIM-) | Transmission revolution sensor signal | Engine idling and clutch pedal fully released | Pulse generation |