87810
1.INSPECT INNER REAR VIEW MIRROR ASSEMBLY
Inspect the operation of the electrochromic inner rear view mirror assembly.
| *a | Black Colored Tape | *b | Forward Sensor |
| *c | Bright | *d | Dark |
| *e | Auxiliary battery | *f | AUTO Switch |
| *g | Component without harness connected
(Inner Rear View Mirror Assembly) |
- | - |
Connect a positive (+) lead from the auxiliary battery to V8-4 (IG) and a negative (-) lead to V8-1 (E).
Press the AUTO switch.
Attach black colored tape to the forward sensor to prevent it from sensing.
Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
Click Location & Routing(V8)Location & Routingewd_type=routing;type=c;code=V8 Click Connector(V8)Body>No. 1 Roof Wire>Inner Rear View Mirror Assemblyewd_type=component;type=c;code=V8;pinno=4,1 |
||
| V8-4 (IG) - Auxiliary battery positive (+)
V8-1 (E) - Auxiliary battery positive (-) |
Light up the mirror with an electric light | Inner rear view mirror surface Bright → Dark |
If the result is not as specified, replace the inner rear view mirror assembly.