86160J
1.INSPECT FRONT NO. 3 SPEAKER ASSEMBLY LH
Check the resistance.
| *a | Component without harness connected
(Front No. 4 Speaker Assembly LH) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
Click Location & Routing(H158)Location & Routingewd_type=routing;type=c;code=H158 Click Connector(H158)Instrument Panel>Instrument Panel Wire / Speaker Wire>No. 3 Front Speaker Assembly LHewd_type=component;type=c;code=H158;pinno=2,1 |
||
| H158-2 (+) - H158-1 (-) | Always | 2.8 to 3.8 Ω |
If the result is not as specified, replace the front No. 3 speaker assembly LH.
86160J
2.INSPECT FRONT NO. 3 SPEAKER ASSEMBLY RH
Check the resistance.
| *a | Component without harness connected
(Front No. 4 Speaker Assembly RH) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
Click Location & Routing(H157)Location & Routingewd_type=routing;type=c;code=H157 Click Connector(H157)Instrument Panel>Instrument Panel Wire / Speaker Wire>No. 3 Front Speaker Assembly RHewd_type=component;type=c;code=H157;pinno=2,1 |
||
| H157-2 (+) - H157-1 (-) | Always | 2.8 to 3.8 Ω |
If the result is not as specified, replace the front No. 3 speaker assembly RH.