Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › ULTRASONIC SENSOR (for Rear) › from 2021.07
RM3700E _56 Audio / Visual / Telematics _093031 PARK ASSIST / MONITORING _0438555 ULTRASONIC SENSOR(for Rear) G

PARK ASSIST / MONITORING  ULTRASONIC SENSOR(for Rear)  INSPECTION  


PROCEDURE

Hide 89342A 1.INSPECT REAR CENTER ULTRASONIC SENSOR (for LH Side)

a.

Check the resistance.

i.
E436585C16
1.698,0.094 2.083,0.344 0.385,0.25 2.021,0.99 2.323,0.521 true 1.656,0.979 1.396,0.354 true 1.396,1 0.948,0.563 true 1.083,1.76 1.396,1.344 true 1.583,1.792 1.646,1.354 true 2.26,1.719 1.979,1.323 true 0.104,0.135 0.417,0.292 0.313,0.156 10 false *a 0.708,0.479 1.021,0.677 0.313,0.198 10 false EO 1.167,0.281 1.479,0.479 0.313,0.198 10 false SO 2.375,0.417 2.688,0.615 0.313,0.198 10 false BO 0.99,1.781 1.302,1.979 0.313,0.198 10 false EI 2.229,1.75 2.542,1.948 0.313,0.198 10 false BI 1.5,1.833 1.813,2.031 0.313,0.198 10 false SI 1.781,0.146 2.094,0.344 0.313,0.198 10 false W2
*a Component without harness connected
(Rear Center Ultrasonic Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(W2)Location & Routing

Click Connector(W2)Body>No. 2 Luggage Room Wire>Rear Ultrasonic Sensor Center LH

W2-4 (BI) - W2-6 (EI) Always 10 kΩ or higher
W2-4 (BI) - W2-1 (BO) Always Below 1 Ω
W2-5 (SI) - W2-2 (SO) Always Below 15 Ω
W2-6 (EI) - W2-3 (EO) Always Below 1 Ω


If the result is not as specified, replace the rear center ultrasonic sensor.



Hide 89342A 2.INSPECT REAR CENTER ULTRASONIC SENSOR (for RH Side)

a.

Check the resistance.

i.
E436585C17
1.74,0.073 2.135,0.323 0.396,0.25 2.01,0.99 2.313,0.521 true 1.635,0.99 1.323,0.385 true 1.396,0.99 0.948,0.552 true 1.094,1.75 1.406,1.333 true 1.583,1.781 1.646,1.344 true 2.292,1.729 2.01,1.333 true 0.104,0.135 0.417,0.292 0.313,0.156 10 false *a 0.708,0.469 1.021,0.667 0.313,0.198 10 false EO 1.083,0.292 1.396,0.49 0.313,0.198 10 false SO 2.354,0.406 2.667,0.604 0.313,0.198 10 false BO 0.99,1.771 1.302,1.969 0.313,0.198 10 false EI 2.25,1.75 2.563,1.948 0.313,0.198 10 false BI 1.5,1.802 1.813,2 0.313,0.198 10 false SI 1.813,0.125 2.125,0.323 0.313,0.198 10 false W3
*a Component without harness connected
(Rear Center Ultrasonic Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(W3)Location & Routing

Click Connector(W3)Body>No. 2 Luggage Room Wire>Rear Ultrasonic Sensor Center RH

W3-4 (BI) - W3-6 (EI) Always 10 kΩ or higher
W3-4 (BI) - W3-1 (BO) Always Below 1 Ω
W3-5 (SI) - W3-2 (SO) Always Below 15 Ω
W3-6 (EI) - W3-3 (EO) Always Below 1 Ω


If the result is not as specified, replace the rear center ultrasonic sensor.



Hide 89342 3.INSPECT REAR CORNER ULTRASONIC SENSOR (for LH Side)

a.

Check the resistance.

i.
E436585C14
1.74,0.104 2.094,0.333 0.354,0.229 2.01,0.99 2.313,0.521 true 1.646,0.979 1.281,0.417 true 1.406,1 0.958,0.563 true 1.104,1.729 1.417,1.313 true 1.583,1.771 1.646,1.333 true 2.302,1.719 2.021,1.323 true 0.104,0.135 0.417,0.292 0.313,0.156 10 false *a 0.708,0.479 1.021,0.677 0.313,0.198 10 false EO 1.052,0.323 1.365,0.521 0.313,0.198 10 false SO 2.354,0.406 2.667,0.604 0.313,0.198 10 false BO 1.01,1.76 1.323,1.958 0.313,0.198 10 false EI 2.26,1.74 2.573,1.938 0.313,0.198 10 false BI 1.49,1.792 1.802,1.99 0.313,0.198 10 false SI 1.802,0.135 2.115,0.333 0.313,0.198 10 false W1
*a Component without harness connected
(Rear Corner Ultrasonic Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(W1)Location & Routing

Click Connector(W1)Body>No. 2 Luggage Room Wire>Rear Ultrasonic Sensor Corner LH

W1-4 (BI) - W1-6 (EI) Always 10 kΩ or higher
W1-4 (BI) - W1-1 (BO) Always Below 1 Ω
W1-5 (SI) - W1-2 (SO) Always Below 15 Ω
W1-6 (EI) - W1-3 (EO) Always Below 1 Ω


If the result is not as specified, replace the rear corner ultrasonic sensor.



Hide 89342 4.INSPECT REAR CORNER ULTRASONIC SENSOR (for RH Side)

a.

Check the resistance.

i.
E436585C68
1.719,0.073 2.135,0.302 0.417,0.229 1.083,1.75 1.396,1.333 true 1.594,1.781 1.656,1.344 true 2.281,1.719 2,1.323 true 0.104,0.135 0.417,0.292 0.313,0.156 10 false *a 1,1.76 1.313,1.958 0.313,0.198 10 false EI 2.24,1.74 2.552,1.938 0.313,0.198 10 false BI 1.51,1.802 1.844,2.01 0.333,0.208 10 false SI 1.813,0.104 2.125,0.302 0.313,0.198 10 false W4
*a Component without harness connected
(Rear Corner Ultrasonic Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(W4)Location & Routing

Click Connector(W4)Body>No. 2 Luggage Room Wire>Rear Ultrasonic Sensor Corner RH

W4-4 (BI) - W4-6 (EI) Always 10 kΩ or higher
W4-4 (BI) - W4-[1] Always Below 1 Ω
W4-5 (SI) - W4-[2] Always Below 15 Ω
W4-6 (EI) - W4-[3] Always Below 1 Ω


If the result is not as specified, replace the rear corner ultrasonic sensor.



Hide 89342B 5.INSPECT REAR SIDE ULTRASONIC SENSOR (for LH Side)

a.

Check the resistance.

i.
E436585C71
1.51,0.073 1.927,0.323 0.417,0.25 0.948,0.708 1.385,0.99 true 1.25,0.5 1.635,0.979 true 2.344,0.615 2,1 true 2.219,1.708 2.031,1.323 true 1.5,1.75 1.635,1.344 true 1.063,1.708 1.385,1.344 true 0.104,0.188 0.417,0.344 0.313,0.156 10 false *a 0.75,0.594 1.063,0.75 0.313,0.156 10 false EO 1,0.396 1.313,0.552 0.313,0.156 10 false SO 2.396,0.531 2.708,0.688 0.313,0.156 10 false BO 0.927,1.729 1.24,1.885 0.313,0.156 10 false EI 1.406,1.792 1.719,1.948 0.313,0.156 10 false SI 2.219,1.75 2.531,1.906 0.313,0.156 10 false BI 1.573,0.125 1.948,0.365 0.375,0.24 10 false W10
*a Component without harness connected
(Rear Side Ultrasonic Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(W10)Location & Routing

Click Connector(W10)Body>No. 2 Luggage Room Wire>Rear Ultrasonic Sensor Side LH

W10-4 (BI) - W10-6 (EI) Always 10 kΩ or higher
W10-4 (BI) - W10-1 (BO) Always Below 1 Ω
W10-5 (SI) - W10-2 (SO) Always Below 15 Ω
W10-6 (EI) - W10-3 (EO) Always Below 1 Ω


If the result is not as specified, replace the rear side ultrasonic sensor.



Hide 89342B 6.INSPECT REAR SIDE ULTRASONIC SENSOR (for RH Side)

a.

Check the resistance.

i.
E436585C72
1.51,0.073 1.927,0.323 0.417,0.25 2.219,1.708 2.031,1.323 true 1.5,1.75 1.635,1.344 true 1.063,1.708 1.385,1.344 true 0.104,0.188 0.417,0.344 0.313,0.156 10 false *a 0.927,1.729 1.24,1.885 0.313,0.156 10 false EI 1.406,1.792 1.719,1.948 0.313,0.156 10 false SI 2.219,1.75 2.531,1.906 0.313,0.156 10 false BI 1.594,0.135 2.01,0.406 0.417,0.271 10 false W11
*a Component without harness connected
(Rear Side Ultrasonic Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(W11)Location & Routing

Click Connector(W11)Body>No. 2 Luggage Room Wire>Rear Ultrasonic Sensor Side RH

W11-4 (BI) - W11-6 (EI) Always 10 kΩ or higher
W11-4 (BI) - W11-[1] Always Below 1 Ω
W11-5 (SI) - W11-[2] Always Below 15 Ω
W11-6 (EI) - W11-[3] Always Below 1 Ω


If the result is not as specified, replace the rear side ultrasonic sensor.