Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION ANTENNA (for Instrument Panel) › from 2021.07
RM3700E _56 Audio / Visual / Telematics _093687 NAVIGATION / MULTI INFO DISPLAY _0442565 NAVIGATION ANTENNA(for Instrument Panel) G

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION ANTENNA(for Instrument Panel)  INSPECTION  


PROCEDURE

Hide 86860 1.INSPECT NAVIGATION ANTENNA ASSEMBLY (w/o Telematics Transceiver)

a.

Check that the navigation antenna assembly cable is properly installed and does not have any sharp bends, pinching or loose connections.


b.

Current consumption check: (GPS)

i.
E458360C02
1.865,1.083 2.521,0.531 true 1.833,1.146 2.188,1.688 true 0.052,0.042 0.323,0.26 0.271,0.219 10 false *a 1.75,2.885 1.958,3.063 0.208,0.177 10 false *b 2.573,0.427 2.844,0.646 0.271,0.219 10 false 3a 2.167,1.729 2.438,1.948 0.271,0.219 10 false 3
*a Component without harness connected
(Navigation Antenna Assembly)
*b Voltage Applied between Terminals


Measure the current consumption according to the value(s) in the table below.

Standard Current:
Tester Connection Condition Specified Condition
3 (core) - 3a (shield) 4.2 to 5 V applied between terminals 3 and 3a 10 to 30 mA


NOTICE:

Do not apply 6 V or more between terminals 3 and 3a.


HINT:

If a stable power supply is not available, connect 4 nickel-metal hydride batteries (1.2 V each) or equivalent in series.




Hide 86860 2.INSPECT NAVIGATION ANTENNA ASSEMBLY (w/ Telematics Transceiver)

a.

Check that the navigation antenna assembly cable is properly installed and does not have any sharp bends, pinching or loose connections.


b.

Current consumption check: (GPS)

i.
E458228C03
1.615,1.25 2.271,0.698 true 1.552,1.302 1.906,1.844 true 0.104,0.104 0.375,0.323 0.271,0.219 10 false *a 1.667,2.885 1.875,3.063 0.208,0.177 10 false *b 2.313,0.604 2.583,0.823 0.271,0.219 10 false 3a 1.896,1.844 2.167,2.063 0.271,0.219 10 false 3
*a Component without harness connected
(Navigation Antenna Assembly)
*b Voltage Applied between Terminals


Measure the current consumption according to the value(s) in the table below.

Standard Current:
Tester Connection Condition Specified Condition
3 (core) - 3a (shield) 4.2 to 5 V applied between terminals 3 and 3a 10 to 30 mA


NOTICE:

Do not apply 6 V or more between terminals 3 and 3a.


HINT:

If a stable power supply is not available, connect 4 nickel-metal hydride batteries (1.2 V each) or equivalent in series.




c.

Resistance check: (Telephone Sub)

i.
E432252C02
1.125,1.177 0.438,0.729 true 1.198,1.229 1.198,1.823 true 1.167,1.823 1.354,1.979 0.188,0.156 10 false 4 0.031,0.031 0.344,0.229 0.313,0.198 10 false *a 0.26,0.635 0.479,0.833 0.219,0.198 10 false 4a
*a Component without harness connected
(Navigation Antenna Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
4 (core) - 4a (shield) Always 9 to 11 kΩ