84970
1.INSPECT ADVANCED PARK MAIN SWITCH (COMBINATION SWITCH ASSEMBLY)
Check the resistance.
| *a | Component without harness connected
(Advanced Park Main Switch (Combination Switch Assembly)) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
Click Location & Routing(H18)Location & Routingewd_type=routing;type=c;code=H18 Click Connector(H18)Instrument Panel>Instrument Panel Wire / Speaker Wire>Combination Switch Assemblyewd_type=component;type=c;code=H18;pinno=3,2 |
||
| H18-3 (IG) - H18-2 (E) | Advanced park main switch (combination switch assembly) is pushed | Below 1 Ω |
| H18-3 (IG) - H18-2 (E) | Advanced park main switch (combination switch assembly) is not pushed | 10 kΩ or higher |
If the result is not as specified, replace the advanced park main switch (combination switch assembly).
Check the illumination.
| *a | Component without harness connected
(Advanced Park Main Switch (Combination Switch Assembly)) |
Apply auxiliary battery voltage to the advanced park main switch (combination switch assembly) and check that the illumination.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
Click Location & Routing(H18)Location & Routingewd_type=routing;type=c;code=H18 Click Connector(H18)Instrument Panel>Instrument Panel Wire / Speaker Wire>Combination Switch Assemblyewd_type=component;type=c;code=H18;pinno=4,1 |
||
| H18-4 (ILL+) - H18-1 (ILL-) | H18-4 (ILL+) → Auxiliary battery positive (+)
H18-1 (ILL-) → Auxiliary battery negative (-) |
Illumination illuminates |
If the result is not as specified, replace the advanced park main switch (combination switch assembly).