CHECK TIRE PRESSURE WARNING ECU AND RECEIVER
| *A | w/o Entry and Start System |
| *B | w/ Entry and Start System |
| *a | Front view of wire harness connector
(to Tire Pressure Warning ECU and Receiver) |
Disconnect the O33*1 or O34*2 tire pressure warning ECU and receiver connector and measure the voltage or resistance on the wire harness side.
*1: w/o Entry and Start System
*2: w/ Entry and Start System
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| O33-1 (IGR) - O33-12 (GND) | IG power source | Ignition switch ON | 10 to 16 V |
| O33-7 (+B) - O33-12 (GND) | Power supply (from auxiliary battery) | Always | 10 to 16 V |
| O33-9 (CANH) - O33-10 (CANL) | CAN communication line | Ignition switch off | 54 to 69 Ω |
| O33-12 (GND) - Body ground | Ground | Always | Below 1 Ω |
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| O34-1 (IGR) - O34-12 (GND) | IG power source | Ignition switch ON | 10 to 16 V |
| O34-7 (+B) - O34-12 (GND) | Power supply (from auxiliary battery) | Always | 10 to 16 V |
| O34-9 (CANH) - O34-10 (CANL) | CAN communication line | Ignition switch off | 54 to 69 Ω |
| O34-12 (GND) - Body ground | Ground | Always | Below 1 Ω |