Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type with TAS Type) › from 2021.07
RM3700E _56 Audio / Visual / Telematics _093686 AUDIO / VIDEO _0484174 AUDIO AND VISUAL SYSTEM(for Radio and Display Type with TAS Type) D

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type with TAS Type)  SYSTEM DESCRIPTION  


USB AUDIO SYSTEM FUNCTION OUTLINE


a.

The No. 1 stereo jack adapter assembly is equipped with a USB connector. Connecting a USB device or "iPod" to the No. 1 stereo jack adapter assembly allows music files to be played. Not only is it possible to play music from a USB device with audio functions, it is also possible to play MP3, WMA, AAC, WAV (LPCM) or FLAC music files that are stored on a USB device. In addition, "iPod" control software is installed, allowing file selection from playlists and operation using Shuffle mode.

HINT:

Operation through the controls of a USB device or "iPod" cannot be performed while it is connected.



b.

USB audio system compatible devices

i.

USB device

The following device formats can be used:

Compatible USB device formats
·

USB communication format: USB 2.0 HS (480 Mbps)

·

File format: FAT32, NTFS, exFAT (Windows)

·

Class: Mass storage class, mass storage protocol, MTP (media transfer protocol)



MP3, WMA, AAC, WAV (LPCM) or FLAC files written to a USB device with any format other than those listed above may not be played correctly, and their names and folder names may not be displayed correctly.

Items related to standards and limitations are as follows:

·

Maximum directory hierarchy: No limit

·

Maximum number of folders in device: No limit (including the root folder)

·

Maximum number of files in device: 20000

·

Maximum number of files per folder: 20000



ii.

"iPod"

"iPhone" and "iPod touch" are trademarks of Apple Inc., registered in the U.S. and other countries.

The following "iPod touch" and "iPhone" devices can be used with this system.

Made for:

·

"iPhone 12 Pro Max"

·

"iPhone 12 Pro"

·

"iPhone 12"

·

"iPhone 12 mini"

·

"iPhone 11 Pro Max"

·

"iPhone 11 Pro"

·

"iPhone 11"

·

"iPhone XS Max"

·

"iPhone XS"

·

"iPhone XR"

·

"iPhone X"

·

"iPhone 8 Plus"

·

"iPhone 8"

·

"iPhone 7 Plus"

·

"iPhone 7"

·

"iPhone SE"

·

"iPhone 6s plus"

·

"iPhone 6s"

·

"iPod touch" (7th generation)


HINT:
·

Depending on differences between models or software versions etc., some models might be incompatible with this system.

·

"iPod video" is not supported.






HIGH-RESOLUTION SOUND SOURCE OUTLINE


a.

This device supports high-resolution sound sources.


b.

The definition of high-resolution is based on the standards of groups such as the CTA (Consumer Technology Association).


c.

The following formats and media can be used:

Supported formats WMA, MP3, AAC, WAV
Playable media USB



FILE INFORMATION OUTLINE


a.

Playable MP3 file standards

Compatible standard MPEG1 LAYER2, MPEG1 LAYER3, MPEG2 LAYER3, MP3 CBR, ABR, VBR
Compatible sampling frequency 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 (kHz)
Compatible bit rate
·

MPEG1 LAYER3/MPEG2 LAYER3: 32 to 320 / 8 to 160 (kbps)

·

MPEG1 LAYER2/MPEG2 LAYER2: 32 to 384 / 8 to 160 (kbps)

·

MPEG1 LAYER1/MPEG2 LAYER1: 32 to 448 / 32 to 256 (kbps)


Compatible channel mode Stereo, joint stereo, dual channel, monaural


b.

Playable WMA file standards

Compatible standard
·

Standard, Lossless, Voice: WMA

·

2/7/8/9.1/9.2/10 Pro/10 Pro LBR: WMA CBR, VBR


Compatible sampling frequency 8, 11.025, 16, 22.05, 32, 44.1, 48, 88, 96 (kHz)
Compatible bit rate (Only compatible with 2-channel playback) Decode all CBR profiles for WMA files from bitrates of 5 kbps to 192 kbps for mono and stereo channels.


c.

Playable AAC file standards

Compatible standard AAC-LC (MPEG2, MPEG4), AAC- HE (v1, v2), BSAC, AAC-ELD
Compatible sampling frequency 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 (kHz)
Compatible bit rate
·

8 to 320 (kbps)

·

Compatible with VBR




d.

Playable WAV (LPCM) file standards*

*: Files with a sample rate higher than 48kHz are down-converted to 48kHz/24bit.

Compatible sampling frequency 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48, 88.2, 96, 176.4, 192 (kHz)
Compatible bit rate 16/24 (bit)


e.

Playable FLAC file standards*

*: Files with a sample rate higher than 48kHz are down-converted to 48kHz/24bit.

Compatible sampling frequency 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48, 88.2, 96, 176.4, 192 (kHz)
Compatible bit rate 16/24 (bit)


f.

Playable M4A file standards

Compatible standard M4A files mostly has AAC codec or Apple Lossless Audio Codec (ALAC) encoded audio content
Compatible sampling frequency 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 (kHz)
Compatible bit rate 32, 48, 64, 80, 96, 112, 128, 160, 192, 224, 256 (kbps)
Compatible channel mode Stereo, monaural


g.

Playable M4B file standards

Compatible standard M4B files mostly has AAC codec encoded audio content. It is mainly used for audio books, extensively by iTunes. Files might be protected using DRM.
Compatible sampling frequency 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 (kHz)
Compatible bit rate 32, 48, 64, 80, 96, 112, 128, 160, 192, 224, 256 (kbps)
Compatible channel mode Stereo, monaural


h.

ID3 tag, WMA tag, AAC tag, TAG and Vorbis comment

i.

Additional text information called an ID3 tag can be input to MP3 files. Information such as song titles, artist names and album names can be stored.

HINT:

This player is compatible with ID3 tags of ID3 Ver. 1.0 and 1.1, and ID3 Ver. 2.2 and 2.3. (Number of characters complies with ID3 Ver. 1.0 and 1.1, ID3 Ver. 2.2 and 2.3)



ii.

Additional text information called a WMA tag can be input to WMA files. Information such as song titles, artist names and album names can be stored.


iii.

Additional text information called an AAC tag can be input to AAC files. Information such as song titles, artist names and album names can be stored.



i.

Usable media

i.

USB devices can be used to play MP3/WMA/AAC/WAV (LPCM)/FLAC files.



j.

Usable media format

i.

Standards and restrictions

Maximum directory levels No limit
Maximum number of characters for a folder name/file name Depends on OS, E.g. 255
Maximum number of folders No limit
Maximum number of files in a disc 20000



k.

File names

i.

Only files with an extension of ".mp3", ".wma", ".m4a", ".wav", ".aac", and ".flac" can be recognized and played as MP3, WMA, AAC, WAV (LPCM) or FLAC files.


ii.

Save MP3, WMA, AAC, WAV (LPCM), or FLAC files with an extension of ".mp3", ".wma", ".m4a", ".wav", ".aac", or ".flac".

NOTICE:

If non-MP3, non-WMA, non-AAC, non-WAV (LPCM) or non-FLAC files are saved with an extension of ".mp3", ".wma", ".m4a", ".wav", ".aac" or ".flac", those files may be wrongly recognized as MP3, WMA, AAC, WAV (LPCM)or FLAC files and played. A loud noise may occur and damage to the speakers may result.





"Bluetooth" OUTLINE


E215384C07
2.406,0.865 2.594,1.031 0.188,0.167 10 *b 3.583,1.896 3.771,2.063 0.188,0.167 10 *c 4.573,1.948 4.969,2.26 0.396,0.313 10 *1 5.563,1.896 5.75,2.063 0.188,0.167 10 *d 4.021,1.385 4.208,1.552 0.188,0.167 10 *e 5.125,1.385 5.313,1.552 0.188,0.167 10 *e 0.073,0.052 0.26,0.219 0.188,0.167 10 *a
*1 Radio and Display Receiver Assembly
(Built-in "Bluetooth" Antenna)
- -
*a Example *b Cellular Network
*c Cellular Phone
("Bluetooth" Compatible Type)
*d Portable Audio Player
("Bluetooth" Compatible Type)
*e "Bluetooth" Wireless Connection - -


a.

"Bluetooth" is a trademark owned by Bluetooth SIG, Inc.


b.

"Bluetooth" is a wireless connection technology that uses the 2.4 GHz frequency band.

HINT:

The communication performance of "Bluetooth" may vary depending on obstructions or radio wave conditions between communication devices, electromagnetic radiation, communication device sensitivity or antenna capacity.



c.

Hands-free function

i.

The "Bluetooth" built-in radio and display receiver assembly and a "Bluetooth" compatible cellular phone* can be connected using a "Bluetooth" wireless connection. This enables the use of the hands-free function on the cellular phone even if the phone is in a pocket or bag. For this reason, it is not necessary to use a connector or cable to connect the cellular phone.

*: Some versions of "Bluetooth" compatible cellular phones may not function properly.


ii.

The hands-free function uses a "Bluetooth" wireless connection. A "Bluetooth" wireless connection can be affected by uncertain elements, such as vehicle location, time of day, etc. Therefore, problems related to establishing connection may be caused temporarily by "Bluetooth" connection conditions. It is necessary to check the frequency of occurrence, connection conditions using another cellular phone, etc. when performing diagnosis.


iii.

Compatible hands-free devices

Required "Bluetooth" specifications Ver. 5.2 recommended
Compatible profiles
·

HFP (Hands Free Profile): recommended Ver. 1.7*1

·

PBAP (Phone Book Access Profile): recommended Ver. 1.2*2

·

MAP (Message Access Profile): recommended Ver.1.4*3

·

DID (Device ID 1.3): recommended Ver. 1.3*4

·

SPP (Serial Port Profile): recommended Ver. 1.2*4


Maximum number of hands-free devices that can be registered (including audio devices) 12

*1: This profile is necessary when using the hands-free function.

*2: This profile is necessary when transferring the phonebook data.

*3: This profile is necessary when using the message function.

*4: This profile is necessary when using the Toyota link function (w/ Toyota Link Function).


HINT:

The amount of remaining battery charge displayed on the radio and display receiver assembly may be different from that of the "Bluetooth" device.




d.

"Bluetooth" audio function

i.

The "Bluetooth" built-in radio and display receiver assembly and a "Bluetooth" compatible portable audio player* can be connected using a "Bluetooth" wireless connection. This enables files stored in the portable audio player to be heard from the vehicle speakers. In addition, operations such as play/stop can be performed directly from the radio and display receiver assembly.

*: Some versions of "Bluetooth" compatible audio players may not be able to be connected via the "Bluetooth" function, or music may play, but functions available using the radio and display receiver assembly may be limited.


ii.

Compatible "Bluetooth" audio devices

Required "Bluetooth" specifications Ver. 5.2 recommended
Compatible profiles
·

A2DP (Advanced Audio Distribution Profile): recommended Ver. 1.6

·

AVRCP (Audio/Video Remote Control Profile): recommended Ver. 1.6


Maximum number of audio devices that can be registered (including hands-free devices) 12

HINT:

"Bluetooth" and "Wi-Fi" use the same 2.4 GHz band radio waves. As a result, if "Bluetooth" audio and "Wi-Fi" are connected at the same time some sound skipping etc., may occur.





RADIO DESCRIPTION


a.

Radio frequency band

i.

Radio broadcasts use the radio frequency bands shown in the table below.

E445347E01
0.677,0.25 1.469,0.458 0.792,0.208 10 false Frequency 1.875,0.25 2.417,0.417 0.542,0.167 10 false 30 kHz 5.25,0.25 5.833,0.417 0.583,0.167 10 false 30 MHz 4.125,0.25 4.677,0.417 0.552,0.167 10 false 3 MHz 2.979,0.25 3.635,0.417 0.656,0.167 10 false 300 kHz 6.365,0.25 6.979,0.417 0.615,0.167 10 false 300 MHz 0.667,0.833 1.458,1.042 0.792,0.208 10 false Designation 0.667,1.313 1.448,1.521 0.781,0.208 10 false Radio wave 0.667,1.792 1.458,2 0.792,0.208 10 false Modulation 2.583,0.833 2.813,1.01 0.229,0.177 10 false LF 3.688,0.833 3.917,1.01 0.229,0.177 10 false MF 4.854,0.833 5.083,1.01 0.229,0.177 10 false HF 5.896,0.833 6.219,1.01 0.323,0.177 10 false VHF 5.75,1.313 5.979,1.49 0.229,0.177 10 false FM 5.552,1.75 6.99,2 1.438,0.25 10 false Frequency modulation 0.344,2.292 1.594,2.5 1.25,0.208 10 false LF: Low Frequency 5.26,2.292 6.979,2.5 1.719,0.208 10 false VHF: Very High Frequency 3.74,2.292 5.063,2.5 1.323,0.208 10 false HF: High Frequency 1.865,2.292 3.5,2.5 1.635,0.208 10 false MF: Medium Frequency



b.

Service area

i.
E445353C01
0.938,2.073 1.104,2.229 0.167,0.156 10 false *a 1.729,3.104 1.896,3.26 0.167,0.156 10 false *b
*a FM (Stereo)
*b FM (Monaural)


The service areas of FM broadcasts are vastly different. FM stereo has the smallest service area, and is prone to pick up static and other types of interference such as noise.



c.

Radio reception problems

HINT:

In addition to static, other problems such as "multipath" and "fade out" exist. These problems are not caused by electrical noise, but by the radio signal propagation method itself.


i.
E177195C06
0.103,0.084 0.298,0.237 0.194,0.153 10 *a
*a Multipath


Multipath

Multipath is a type of interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off buildings or mountains and the other signal is received directly from the transmitter.


ii.
E177196C05
0.112,0.045 0.282,0.229 0.17,0.184 10 *a
*a Fade Out


Fade out

Fade out is caused by objects (buildings, mountains and other large obstructions) that deflect part of a signal, resulting in a weaker signal when the object is between the transmitter and vehicle. High frequency radio waves, such as FM broadcasts, are easily deflected by obstructions.



d.

Noise problem

Technicians must have a clear understanding about each customer's noise complaint. Use the following table to diagnose noise problems.

Radio Frequency Noise Occurrence Condition Presumable Cause
FM Noise occurs while driving in a specific area Multipath resulting from a change in FM frequency



AUTOMATIC SOUND LEVELIZER (ASL) FUNCTION OUTLINE


a.

The Automatic Sound Levelizer (ASL) function automatically adjusts the audio system volume in order to compensate for increased vehicle noise (vehicle noise tends to increase as vehicle speed increases). The ASL adjusts the volume based upon vehicle speed signals sent from the combination meter assembly.



"Apple CarPlay" FUNCTION OUTLINE (w/ "Apple CarPlay" Function)


a.

The "Apple CarPlay" function is a function that enables the head unit to operate applications on a smartphone by connecting the smartphone to the head unit using a dedicated cable or "Bluetooth" and "Wi-Fi" wireless connection.

HINT:
·

Refer to the owner's manual included with the device for information about "Apple CarPlay" support.

·

Some applications have a display restriction in consideration of safe driving.





"Android Auto" FUNCTION OUTLINE (w/ "Android Auto" Function)


a.

The "Android Auto" function is a function that enables the head unit to operate applications on a smartphone by connecting the smartphone to the head unit using a dedicated cable or "Bluetooth" and "Wi-Fi" wireless connection.

HINT:
·

Refer to the owner's manual included with the device for information about "Android Auto" support.

·

Some applications have a display restriction in consideration of safe driving.





DIGITAL AUDIO BROADCAST (DAB) FUNCTION OUTLINE


a.

Digital Audio Broadcast (DAB) is the standard for digital radio. Compared to conventional AM/FM broadcasting, DAB enables higher sound quality radio broadcasting with lower noise when reception conditions change. DAB has an FM-Link function that automatically and temporarily changes the radio to the simultaneously broadcasted FM station if the DAB broadcasting reception level falls.



"Wi-Fi" OUTLINE


a.

"Wi-Fi" is divided into two functions described in the following table.

Function Description
Station Function* Function that connects the radio and display receiver assembly to an access point
P2P Function Function that connects the radio and display receiver assembly to another device directly

*: w/ "Wi-Fi" (Station) Function



b.

"Wi-Fi" is a worldwide wireless communication standard widely used as a short range communication tool.


c.

"Wi-Fi" is a trademark owned by Wi-Fi Alliance, a non-profit industry association.


d.

The radio and display receiver assembly uses the 2.4 GHz or 5 GHz frequency band for "Wi-Fi" communication.

HINT:

The communication performance of "Wi-Fi" may vary depending on obstructions or radio wave conditions between communication devices, electromagnetic radiation, communication device sensitivity or antenna capacity.




COMMUNICATION SYSTEM


a.

Local Bus Communication Outline

E323019C06
0.135,0.125 0.448,0.323 0.313,0.198 10 false *a 3.479,1.438 3.792,1.635 0.313,0.198 10 false *b 1.688,2.104 2,2.302 0.313,0.198 10 false *c 5.271,2.104 5.583,2.302 0.313,0.198 10 false *d
*a Example *b Local Bus Communication Line
*c Master Unit *d Slave Unit


i.

Components of the audio and visual system communicate with each other via the local bus.


ii.

The local bus uses a twisted pair of wires for its communication lines.


iii.

The master unit of the local bus is the radio and display receiver assembly.

HINT:
·

The radio and display receiver assembly has the resistance (108 to 132 Ω) necessary for communication.

·

If a short or open occurs in the local bus circuit, communication is interrupted and the system will not operate normally.





b.

AVC-LAN Outline (for 8 Speakers)

E323017C03
0.135,0.115 0.448,0.313 0.313,0.198 10 false *a 3.469,1.427 3.781,1.625 0.313,0.198 10 false *b 1.677,2.125 1.99,2.323 0.313,0.198 10 false *c 5.271,2.125 5.583,2.323 0.313,0.198 10 false *d
*a Example *b AVC-LAN Communication Line
*c Master Unit *d Slave Unit


i.

Components of the audio and visual system communicate with each other via AVC-LAN communication.


ii.

The AVC-LAN uses a twisted pair of wires for its communication lines.


iii.

The master unit of the AVC-LAN is the radio receiver assembly.

HINT:
·

The radio receiver assembly has the resistance (60 to 80 Ω) necessary for communication.

·

If a short or open occurs in the AVC-LAN circuit, communication is interrupted and the system will not operate normally.





c.

CAN Communication Outline

i.

The audio and visual system uses CAN communication between the radio and display receiver assembly and ECUs.




DIAGNOSTIC FUNCTION OUTLINE


a.

The audio and visual system has a diagnostic function (the result is indicated on the master unit).