Home › Vehicle Interior › POWER OUTLETS (INT) › WIRELESS CHARGING SYSTEM › from 2021.07
RM3700E _58 Vehicle Interior _093029 POWER OUTLETS (INT) _0484176 WIRELESS CHARGING SYSTEM U

POWER OUTLETS (INT)  WIRELESS CHARGING SYSTEM  TERMINALS OF ECU  


CHECK MOBILE WIRELESS CHARGER CRADLE ASSEMBLY


E216115C01
3.365,0.156 3.781,0.406 0.417,0.25 3.448,0.177 3.792,0.344 0.344,0.167 10 false H86

Terminal No. (Symbol) Terminal Description Condition Specified Condition
H86-1 (PGND) - Body ground Ground Always Below 1 Ω
H86-5 (ACC) - H86-1 (PGND) Power source (ACC) Ignition switch ACC 11 to 14 V
Ignition switch off Below 1 V
H86-6 (B+) - H86-1 (PGND) Power source (+B) Ignition switch off 11 to 14 V
H86-7 (DIS) - Body ground*1 Charging suspension signal For 5 seconds after turning ignition switch from off to ACC*3 4.5 to 6.0 V
Device being charged Below 1 V
Charging suspended due to entry and start system status*4 4.5 to 6.0 V
H86-8 (SDET) - Body ground*2 Ground Always Below 1 Ω
H86-9 (ILL-) - Body ground Illumination ground Always Below 1 Ω
H86-10 (TAIL) - Body ground Illumination signal Light control switch in off position Below 1 V
Ignition switch off, light control switch in tail or head position 11 to 14 V

*1: w/ Entry and Start System

*2: w/o Entry and Start System

*3: When the ignition switch is turned from off to ACC, the mobile wireless charger cradle assembly monitors the charging suspension signal for 5 seconds. If the charging suspension signal is not 4 V or more for 0.8 seconds or more during monitoring, the mobile wireless charger cradle assembly determines that there is an open in the charging suspension signal line, blinks (pattern 1) the indicator light (amber), and prohibits operation until the ignition switch is turned from off to ACC again.

*4: For details about conditions when the certification ECU (smart key ECU assembly) sends the charging suspension signal, refer to System Description.

Click hereVehicle Interior>POWER OUTLETS (INT)>WIRELESS CHARGING SYSTEM>SYSTEM DESCRIPTION