87510L
1.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH
| *a | Component without harness connected
(Front Seat Cushion Heater Assembly LH) |
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
If the result is not as specified, replace the front seat cushion heater assembly LH. |
||
|
Click Location & Routing(O58)Location & Routingewd_type=routing;type=c;code=O58 Click Connector(O58)Seat>Floor Wire>Front Seat Cushion Heater Assembly LHewd_type=component;type=c;code=O58;pinno=6,7,5 |
||
| O58-6 - A-1 | Seat heater temperature 20°C (68°F) | Below 1 Ω |
| O58-7 - A-2 | Seat heater temperature 20°C (68°F) | 1.57 to 1.93 Ω |
| O58-5 - A-3 | Seat heater temperature 20°C (68°F) | 2.84 to 3.48 Ω |
87510K
2.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH
| *a | Component without harness connected
(Front Seat Cushion Heater Assembly RH) |
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
If the result is not as specified, replace the front seat cushion heater assembly RH. |
||
|
Click Location & Routing(v3)Location & Routingewd_type=routing;type=c;code=v3 |
||
| v3-6 - A-1 | Seat heater temperature 20°C (68°F) | Below 1 Ω |
| v3-7 - A-2 | Seat heater temperature 20°C (68°F) | 1.57 to 1.93 Ω |
| v3-5 - A-3 | Seat heater temperature 20°C (68°F) | 2.84 to 3.48 Ω |