PARKING ASSIST ECU
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| O25-1 (+B) -Body ground | Ignition source signal | Ignition switch off | 11 to 14 V |
| O25-19 (+B2) - Body ground | Ignition source signal | Ignition switch off | 11 to 14 V |
| O25-3 (ACC) - Body ground | ACC power source signal | Ignition switch ACC | 11 to 14 V |
| Ignition switch off | Below 1 V | ||
| O25-21 (IG) - Body ground | IG power source signal | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | ||
| O25-2 (GND1) - Body ground | Ground | Always | Below 1 Ω |
| O25-20 (GND2) - Body ground | Ground | Always | Below 1 Ω |
| O25-40 (CANH) | CAN communication line | - | - |
| O25-18 (CANL) | CAN communication line | - | - |
| O25-15 (BLSW) - Body ground | Panoramic view monitor switch signal | Ignition switch ON, panoramic view monitor switch off | 5.5 to 6.5 V |
| Ignition switch ON, panoramic view monitor switch on | Below 1 V | ||
| O25-37 (RSW+) - Body ground | Terminal required by law | Panoramic image being displayed | 0 to 2 V |
| Panoramic image not being displayed | 5.5 to 7.05 V | ||
| O25-36 (LCV+) - O25-26 (LGND) | Side television camera assembly LH display signal input | Ignition switch ON, panoramic view monitor switch on, camera lens not covered, displaying image | Pulse generation (See waveform 1) |
| Ignition switch ON, panoramic view monitor switch on, camera lens covered, blacking out screen | Pulse generation (See waveform 2) | ||
| O25-14 (SGND) - Body ground | Side television camera assembly LH ground (shield) | Always | Below 1 Ω |
| O25-9 (LCB+) - O25-26 (LGND) | Ignition source to side television camera assembly LH | Ignition switch ON | 5.5 to 7.05 V |
| O25-10 (BCV-) - Body ground | Front television camera assembly display ground | Always | Below 1 Ω |
| O25-34 (SGND) - Body ground | Front television camera assembly ground (shield) | Always | Below 1 Ω |
| O25-7 (BCB+) - O25-24 (BGND) | Power source to front television camera | Ignition switch ON | 5.5 to 7.05 V |
| O25-31 (RCV-) - Body ground | Side television camera assembly RH display ground | Always | Below 1 Ω |
| O25-23 (RGND) - Body ground | Side television camera assembly RH display ground | Always | Below 1 Ω |
| O25-11 (CV+) - O25-25 (CGND) | Rear television camera assembly display signal input | Ignition switch ON, panoramic view monitor switch on, camera lens not covered, displaying image | Pulse generation (See waveform 1) |
| Ignition switch ON, panoramic view monitor switch on, camera lens covered, blacking out screen | Pulse generation (See waveform 2) | ||
| O25-35 (CV-) - Body ground | Rear television camera assembly display ground | Always | Below 1 Ω |
| O25-12 (SGND) - Body ground | Rear television camera assembly ground (shield) | Always | Below 1 Ω |
| O25-25 (CGND) - Body ground | Rear television camera assembly ground | Always | Below 1 Ω |
| O25-8 (CB+) - O25-25 (CGND) | Ignition source to television camera assembly | Ignition switch ON | 5.5 to 7.05 V |
| O25-13 (LCV-) - Body ground | Side television camera assembly LH display ground | Always | Below 1 Ω |
| O25-26 (LGND) - Body ground | Side television camera assembly LH ground | Always | Below 1 Ω |
| O25-33 (BCV+) - O25-24 (BGND) | Front television camera assembly display signal input | Waveform 1: Ignition switch ON, panoramic view monitor switch on, camera lens not covered, displaying image | Pulse generation (See waveform 1) |
| Waveform 2: Ignition switch ON, panoramic view monitor switch on, camera lens covered, blacking out screen | Pulse generation (See waveform 2) | ||
| O25-24 (BGND) - Body ground | Front television camera assembly display ground | Always | Below 1 Ω |
| O25-30 (RCV+) - O25-23 (RGND) | Side television camera assembly RH display signal input | Waveform 1: Ignition switch ON, panoramic view monitor switch on, camera lens not covered, displaying image | Pulse generation (See waveform 1) |
| Waveform 2: Ignition switch ON, panoramic view monitor switch on, camera lens covered, blacking out screen | Pulse generation (See waveform 2) | ||
| O25-32 (SGND)- Body ground | Side television camera assembly RH ground (shield) | Always | Below 1 Ω |
| O25-27 (NS+) - O25-28 (NS-) | Video signal | Ignition switch ON, panoramic view monitor switch on, camera lens not covered, displaying image | Pulse generation (See waveform 3) |
| O25-29 (NSG) - Body ground | Shield ground | Always | Below 1 Ω |
| O25-28 (NS-) - Body ground | Video ground | Always | Below 1 Ω |
Using an oscilloscope, check the waveform.
| *a | Waveform 1 | *b | Waveform 2 |
| *c | Synchronization Signal | *d | Video Waveform |
Waveform 1, 2
| Item | Content |
|---|---|
| Measurement terminal | ·
O25-36 (LCV+) - O25-26 (LGND) ·
O25-11 (CV+) - O25-25 (CGND) ·
O25-33 (BCV+) - O25-24 (BGND) ·
O25-30 (RCV+) - O25-23 (RGND) |
| Measurement setting | 200 mV/DIV., 50 μsec./DIV. |
| Condition | ·
Waveform 1: Ignition switch ON, panoramic view monitor switch on, camera lens not covered, displaying image ·
Waveform 2: Ignition switch ON, panoramic view monitor switch on, camera lens covered, blacking out screen |
The video waveform changes according to the image sent by the television camera assembly.
The video waveform is constantly output when the ignition switch is ACC.
| *a | Waveform 3 (camera lens is not covered, displaying an image) |
| *b | Synchronization Signal |
| *c | Video Waveform |
Waveform 3
| Item | Content |
|---|---|
| Measurement terminal | O25-27 (NS+) - O25-28 (NS-) |
| Measurement setting | 200 mV/DIV., 50 μs./DIV. |
| Condition | Ignition switch ON, panoramic view monitor switch on, camera lens not covered, displaying image |
The video waveform changes according to the image sent by the parking assist ECU.
RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Audio and Visual System (for Radio and Display Type without TAS Type))
RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Navigation System)
Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>TERMINALS OF ECU