Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PANORAMIC VIEW MONITOR SYSTEM (w/o Advanced Park) › from 2021.07
RM3700E _56 Audio / Visual / Telematics _093031 PARK ASSIST / MONITORING _0485737 PANORAMIC VIEW MONITOR SYSTEM(w/o Advanced Park) C

PARK ASSIST / MONITORING  PANORAMIC VIEW MONITOR SYSTEM(w/o Advanced Park)  U0073  Control Module Communication Bus Off  U0100  Lost Communication with ECM/PCM "A"  U0126  Lost Communication with Steering Angle Sensor Module  U0129  Lost Communication with Brake System Control Module  U0140  Lost Communication with Body Control Module  U0163  Lost Communication With Navigation Control Module  U0233  Lost Communication with Blind Spot Monitor Master Module  U0293  Lost Communication with Hybrid Control Module  U1110  Lost Communication with Clearance Sonar Module  


DESCRIPTION

These DTCs are stored if there is a malfunction in the CAN communication system connected to the parking assist ECU.

HINT:

If CAN communication system DTCs are stored, they may also be stored in other systems.


DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
U0073 Control Module Communication Bus Off Control module communication bus off CAN communication system Circumference Monitoring Camera Control Module B
U0100 Lost Communication with ECM/PCM "A" Lost communication with ECM CAN communication system Circumference Monitoring Camera Control Module B
U0126 Lost Communication with Steering Angle Sensor Module Lost communication with steering sensor CAN communication system Circumference Monitoring Camera Control Module B
U0129 Lost Communication with Brake System Control Module Lost communication with brake actuator assembly (no. 2 skid control ECU) CAN communication system Circumference Monitoring Camera Control Module B
U0140 Lost Communication with Body Control Module Lost communication with main body ECU (multiplex network body ECU) CAN communication system Circumference Monitoring Camera Control Module B
U0163 Lost Communication With Navigation Control Module Lost communication with radio and display receiver assembly CAN communication system Circumference Monitoring Camera Control Module B
U0233 Lost Communication with Blind Spot Monitor Master Module Lost communication with blind spot monitor sensor LH CAN communication system Circumference Monitoring Camera Control Module B
U0293 Lost Communication with Hybrid Control Module Lost communication with hybrid vehicle control ECU CAN communication system Circumference Monitoring Camera Control Module B
U1110 Lost Communication with Clearance Sonar Module Lost communication with clearance warning ECU assembly CAN communication system Circumference Monitoring Camera Control Module B

PROCEDURE

1.CLEAR DTC
a.

Clear the DTCs.

HINT:

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM (w/o Advanced Park)>DTC CHECK / CLEAR


Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
50002 353
Result:
Proceed to
NEXT




NEXT

2.CHECK FOR DTC
2.CHECK FOR DTC
a.

Check for DTCs.

HINT:

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM (w/o Advanced Park)>DTC CHECK / CLEAR


Chassis > Circumference Monitoring Camera Control Module > Trouble Codes
50001 353
Result:
Result Proceed to
U0073, U0126, U0129, U0140, U0163, U0233, U0265, U0293 or U1110 is not output A
U0073, U0126, U0129, U0140, U0163, U0233, U0265, U0293 and U1110 are not output B


HINT:
·

If CAN communication system DTCs are stored, they may also be stored in other systems.

·

If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.

·

If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even though the DTC was not output when rechecking for DTCs.

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING





A

B