Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › FRONT DRIVE SHAFT ASSEMBLY (for M15A-FXE TMMF Made) › from 2021.07
RM3700E _52 Drivetrain _094372 DRIVE SHAFT / PROPELLER SHAFT _0481085 FRONT DRIVE SHAFT ASSEMBLY(for M15A-FXE TMMF Made) G

DRIVE SHAFT / PROPELLER SHAFT  FRONT DRIVE SHAFT ASSEMBLY(for M15A-FXE TMMF Made)  INSPECTION  


PROCEDURE

Hide 1.INSPECT FRONT DRIVE SHAFT ASSEMBLY

a.
C211744

Check that there is no excessive play in the radial direction of the outboard joint.


b.

Check that the inboard joint slides smoothly in the thrust direction.


c.

Check that there is no excessive play in the radial direction of the inboard joint.


d.

Check the boots for damage.


e.
C464083N01
1.448,1.458 1.604,1.656 0.156,0.198 10 false A

Check whether the dimension (A) of each drive shaft is within the specification.

Dimension (A):
for LH Side 627.95 mm (2.06 ft.)
for RH Side 840.9 mm (2.76 ft.)


NOTICE:

Keep the drive shaft assembly level during inspection.