These DTCs are stored if a CAN communication malfunction occurs between the forward recognition camera and other ECUs.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| U010087 | Lost Communication with ECM/PCM "A" Missing Message | The forward recognition camera does not receive data from the ECM for approximately 5 seconds or more. | CAN communication system | Front Recognition Camera (Front Lighting Control) | B |
| U010187 | Lost Communication with TCM Missing Message | for HV Model:
The forward recognition camera does not receive data from the hybrid vehicle control ECU for approximately 5 seconds or more. for Gasoline Model:
The forward recognition camera does not receive data from the ECM for approximately 5 seconds or more. |
CAN communication system | Front Recognition Camera (Front Lighting Control) | B |
| U012987 | Lost Communication with Brake System Control Module Missing Message | for HV Model:
The forward recognition camera does not receive data from the skid control ECU (brake actuator assembly) for approximately 5 seconds or more. for Gasoline Model:
The forward recognition camera does not receive data from the skid control ECU (brake actuator assembly) for approximately 5 seconds or more. |
CAN communication system | Front Recognition Camera (Front Lighting Control) | B |
| U014087 | Lost Communication with Body Control Module Missing Message | The forward recognition camera does not receive data from the main body ECU (multiplex network body ECU) for approximately 5 seconds or more. | CAN communication system | Front Recognition Camera (Front Lighting Control) | B |
| U029387 | Lost Communication With Hybrid Powertrain Control Module Missing Message | The forward recognition camera does not receive data from the hybrid vehicle control ECU for approximately 5 seconds or more. | CAN communication system | Front Recognition Camera (Front Lighting Control) | B |
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Pre-procedure1
Turn the ignition switch to ON.
Wait 10 seconds or more.
Procedure1
Check for DTCs.
| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| U010087, U010187, U012987, U014087 or U029387 is output | B |
Post-procedure1
None
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
for HV Model: Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>HOW TO PROCEED WITH TROUBLESHOOTING
for Gasoline Model: Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for Gasoline Model)>HOW TO PROCEED WITH TROUBLESHOOTING