Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH › from 2021.07
RM3700E _58 Vehicle Interior _093748 THEFT DETERRENT / KEYLESS ENTRY _0483882 ENGINE HOOD COURTESY SWITCH G

THEFT DETERRENT / KEYLESS ENTRY  ENGINE HOOD COURTESY SWITCH  INSPECTION  


PROCEDURE

Hide 53510 1.INSPECT ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY) (for LHD)

a.
B594329C01
1.542,2.844 1.958,3.01 0.417,0.167 1.396,3.823 1.583,3.531 true 2.063,3.823 1.896,3.563 true 1.333,1.021 0.708,0.948 true 1.281,1.24 0.729,1.198 true 0.521,1.125 0.833,1.323 0.313,0.198 10 false *b 0.531,0.865 0.844,1.063 0.313,0.198 10 false *a 0.604,2.688 0.917,2.885 0.313,0.198 10 false *c 1.292,3.854 1.604,4.052 0.313,0.198 10 false + 2.063,3.865 2.375,4.063 0.313,0.198 10 false E 1.615,2.844 1.927,3.042 0.313,0.198 10 false A58
*a Open
*b Lock
*c Component without harness connected
(Engine Hood Courtesy Switch (Hood Lock Assembly))


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition

Click Location & Routing(A58)Location & Routing

Click Connector(A58)Engine Compartment>Engine Room Main Wire>Hood Lock Assembly

A58-1 (+) - A58-2 (E) Locked Below 1 Ω
A58-1 (+) - A58-2 (E) Unlocked 10 kΩ or higher


If the result is not as specified, replace the engine hood courtesy switch (hood lock assembly).



Hide 53510 2.INSPECT ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY) (for RHD)

a.
B499930C03
1.583,2.885 1.917,3.052 0.333,0.167 1.26,1.063 1.802,0.833 true 1.26,0.917 1.802,0.531 true 1.438,3.813 1.604,3.542 true 2.073,3.823 1.885,3.552 true 0.615,2.76 0.927,2.917 0.313,0.156 10 false *c 1.875,0.75 2.188,0.906 0.313,0.156 10 false *b 1.865,0.427 2.177,0.583 0.313,0.156 10 false *a 1.365,3.854 1.521,4.052 0.156,0.198 10 false + 2.115,3.854 2.271,4.052 0.156,0.198 10 false E 1.646,2.906 2.104,3.104 0.458,0.198 10 false A58
*a Open
*b Lock
*c Component without harness connected
(Engine Hood Courtesy Switch (Hood Lock Assembly))


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition

Click Location & Routing(A58)Location & Routing

Click Connector(A58)Engine Compartment>Engine Room Main Wire>Hood Lock Assembly

A58-1 (+) - A58-2 (E) Locked Below 1 Ω
A58-1 (+) - A58-2 (E) Unlocked 10 kΩ or higher


If the result is not as specified, replace the engine hood courtesy switch (hood lock assembly).