Home › General › SPECIFICATIONS › M15A-FKS BATTERY / CHARGING › from 2021.07
RM3700E _V1 General _093022 SPECIFICATIONS _0442321 M15A-FKS BATTERY / CHARGING F

SPECIFICATIONS  M15A-FKS BATTERY / CHARGING  TORQUE SPECIFICATIONS  


GENERATOR WITH REGULATOR ASSEMBLY (for 80 A Type)
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Retainer plate x Generator drive end frame 2.3 23 20
Generator coil assembly x Generator drive end frame 5.6 57 50
Generator brush holder assembly x Generator coil assembly 1.8 18 16
Generator rear end cover x Generator coil assembly 4.6 47 41
Generator pulley with clutch x Generator rotor assembly with SST 56 571 41
without SST 70 714 52
Wire harness clamp bracket x Generator with regulator assembly 10 102 7
Generator with regulator assembly x Cylinder block 25 255 18
Wire harness x Terminal B 9.8 100 87

GENERATOR WITH REGULATOR ASSEMBLY (for 100 A Type)
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Retainer plate x Generator drive end frame 2.3 23 20
Generator coil assembly x Generator drive end frame 5.6 57 50
Generator brush holder assembly x Generator coil assembly 1.8 18 16
Generator rear end cover x Generator coil assembly 4.6 47 41
Generator pulley with clutch x Generator rotor assembly with SST 56 571 41
without SST 70 714 52
Wire harness clamp bracket x Generator with regulator assembly 10 102 7
Generator with regulator assembly x Cylinder block 25 255 18
Wire harness x Terminal B 9.8 100 87

GENERATOR WITH REGULATOR ASSEMBLY (for 120 A Type)
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Retainer plate x Generator drive end frame 2.3 23 20
Generator coil assembly x Generator drive end frame 5.6 57 50
Generator brush holder assembly x Generator coil assembly 1.8 18 16
Generator rear end cover x Generator coil assembly 4.6 47 41
Generator pulley with clutch x Generator rotor assembly with SST 74.4 759 55
without SST 80 816 59
Wire harness clamp bracket x Generator with regulator assembly 10 102 7
Generator with regulator assembly x Cylinder block 25 255 18
Wire harness x Terminal B 9.8 100 87

AUXILIARY BATTERY
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
No. 2 Battery Clamp x Battery clamp sub-assembly 15.4 157 11
Positive (+) auxiliary battery cable x Battery terminal 5.6 57 50
Negative (-) auxiliary battery cable x Battery terminal 5.4 55 48