RADIATOR SUPPORT (for Hatchback) > ASSEMBLY REPLACEMENT


K100640

REMOVAL

Symbol meaning
K100014
Remove Weld Points
REMOVAL POINT
  1. *1: Bolts.

K101480E01


INSTALLATION

Symbol meaning
K100019
Plug Weld
INSTALLATION POINT
  1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
  2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
  3. *1: Bolts.
  4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
  5. Measure the dimensions before installing the headlights.

Reference Value 
Area
Measurement
Area
Measurement
*a
1333 mm (52.48 in.)
*b
858 mm (33.78 in.)
*c
696 mm (27.40 in.)
*d
740 mm (29.13 in.)
*e
172.6 mm (6.80 in.)
*f
185.2 mm (7.29 in.)

K101481E01


K101482E01