QUARTER WHEEL HOUSING OUTER PANEL (for Hatchback 3 Door) > ASSEMBLY REPLACEMENT



  1. K101519
    With the quarter panel removed.

REMOVAL

Symbol meaning
K100014
Remove Weld Points
K100015
Remove Weld Points
K100016
Remove Weld Points
K100023
Cut and Join Location
REMOVAL POINT
  1. *1 and *2 is reused.
  2. After removing the *1 and *2, remove the quarter wheel house panel outer.

K101521E01


K101522E01


K101523E01


K101524E01


INSTALLATION

Symbol meaning
K100017
Spot Weld
K100019
Plug Weld
K100020
Plug Weld
K100021
Plug Weld
K100027
Butt Weld
K100030
Body Sealer
K100031
Assembly Mark
INSTALLATION POINT
  1. When welding *1, make a hole on a new part for plug welding and weld the panel with the panel behind completely.
  2. For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.
  3. Before installing a new part, apply body sealer.

    HINT:
    Apply body sealer in an even, continuous bead.

  4. After welding the quarter wheel house panel outer and quarter trim retainer lower to the vehicle side, install the *2 and *3.
  5. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)
  6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

K101525E01


K101526E01


K101527E01


K101528E01