QUARTER PANEL END HOUSING (for Sedan) > ASSEMBLY REPLACEMENT



  1. K101687

REMOVAL

Symbol meaning
K100014
Remove Weld Points
K100016
Remove Weld Points
K100022
Cut with Disc Sander etc.
K100028
Braze

K101706E01


INSTALLATION

Symbol meaning
K100019
Plug Weld
K100021
Plug Weld
K100028
Braze
INSTALLATION POINT
  1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
  2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
  3. After welding, apply body sealer to the corresponding parts. (See the painting / coating)
  4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

K101707E01