FRONT SIDE MEMBER (for Sedan) > ASSEMBLY REPLACEMENT (PATTERN 2)



  1. K101652
    With the front fender apron removed.

REMOVAL

Symbol meaning
K100014
Remove Weld Points

K101799E01


K101800E01


INSTALLATION

Symbol meaning
K100019
Plug Weld
INSTALLATION POINT
  1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
  2. Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.
  3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)
  4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

K101801E01


K101802E01