FLOOR SIDE RAIL FRONT PANEL (for Sedan) > ASSEMBLY REPLACEMENT



  1. K101690
    With the body lower back panel removed.

REMOVAL

Symbol meaning
K100014
Remove Weld Points
K100016
Remove Weld Points
K100022
Cut with Disc Sander etc.

K101710E01


INSTALLATION

Symbol meaning
K100019
Plug Weld
K100021
Plug Weld
K100026
Fillet Weld
INSTALLATION POINT
  1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
  2. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)
  3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

K101711E01