AXLE SYSTEM (for Sedan) > GENERAL |
| OUTLINE |
Front Axle
The front axle uses a double-row angular ball bearing which offers low rolling resistance.
Due to an active type speed sensor being adopted, a sensor rotor is provided on the hub bearing inner race.

| *1 | Double-row Angular Ball Bearing | *2 | Inner Race |
| *3 | Sensor Rotor | *4 | Front Speed Sensor |
Rear Axle
The rear axle uses a double-row angular ball bearing which offers low rolling resistance.
Due to the use of an active type speed sensor, a sensor rotor is provided on the outer circumference of the hub bearing inner race.

| *1 | Inner Race | *2 | Double-row Angular Ball Bearing |
| *3 | Rear Speed Sensor (Skid Control Sensor Wire) | *4 | Sensor Rotor |