REAR SUSPENSION SYSTEM (for Sedan) > DETAILS



CONSTRUCTION


  1. Axle Beam and Trailing Arm



    1. The axle beam offers not only high rigidity but also stability by optimized shearing center position. The axle beam is welded to both trailing arm and spring seat. The trailing arm is fixed on the body via an angled bushing.


      X105783E01


      Text in Illustration 
      *1
      Inner Cylinder
      *2
      Rear Axle Carrier Bush
      *3
      Axle Beam (Rear Axle Beam Assembly)
      *4
      Trailing Arm (Rear Axle Beam Assembly)
      *a
      Cross Section
      -
      -
      V100135
      Front
      -
      -