DRIVE SHAFT SYSTEM (for Sedan) > GENERAL |
| OUTLINE |
A tripod type Constant Velocity Joint (CVJ) is used on the differential side, and Rzeppa type CVJ is used on the wheel side.
A dynamic damper is provided on the right drive shaft to reduce vibration and noise.

| *1 | Rzeppa Type CVJ | *2 | Tripod Type CVJ |
| *3 | Front Drive Shaft Assembly LH | *4 | Front Drive Shaft Assembly RH |
| *5 | Dynamic damper | - | - |
![]() | Wheel Side | ![]() | Differential Side |