MANUAL TRANSAXLE SYSTEM (for Hatchback) > GENERAL |
| OUTLINE |
The C50 5-speed manual transaxle is used on the models with the 1NZ-FE engine.
This transaxle realizes smooth, easy and accurate shift operation due to the following items.
A double-cone type synchromesh mechanism is used for the 2nd gear to reduce the shift effort.
An excellent shift feel has been achieved through the adoption of the shift lever damper on the shift and select shaft assembly and sliding ball bearing.
A shift guide mechanism is used.
A select cable with a length adjustment mechanism is used.

| *a | Shift Pattern | - | - |
| SPECIFICATION |
| Item | Specification | |
| Mesh Type | Forward | Constant Mesh |
| Reverse | Sliding Mesh | |
| Gear Ratio | 1st | 3.545 |
| 2nd | 1.904 | |
| 3rd | 1.310 | |
| 4th | 0.969 | |
| 5th | 0.815 | |
| Reverse | 3.250 | |
| Differential Gear Ratio | 3.722 | |
| Oil Capacity | 1.9 Liters (2.0 US qts, 1.7 Imp. qts) | |
| Oil Viscosity | SAE 75W-90 | |
| Oil Grade | API GL-4 | |
| Weight (Dry) | 37.5 kg (82.7 lb) | |