MANUAL TRANSAXLE SYSTEM (for Hatchback) > DETAILS



CONSTRUCTION


  1. Shift and Select Mechanism

    1. An excellent shift feel has been achieved through the use of the shift lever on the shift and select lever shaft assembly and sliding ball bearing.



    2. A shift guide plate is provided on the shift and select lever shaft assembly. The movement distance of the shift and select lever shaft assembly in the select direction after completing the shifting is regulated by the shift guide plate and shift guide pin. This clarifies the position of the shift knob and enables accurate shift operations.


      X105807E01


      Text in Illustration 
      *1
      Shift Guide Plate
      *2
      Shift Guide Pin
      *3
      Shift Lever Damper
      *4
      Shift and Select Lever Shaft Assembly
      *5
      Sliding Ball Bearing
      -
      -
      *a
      Select Direction
      *b
      Shift Direction
      *c
      Neutral Position
      *d
      Shift Completed